Re: [PATCH v1 1/1] i2c: iproc: generate stop event for slave writes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Mar 22, 2020 at 11:50:19PM +0530, Rayagonda Kokatanur wrote:
> When slave status is I2C_SLAVE_RX_END, generate I2C_SLAVE_STOP
> event to i2c_client.
> 
> Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode")
> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>

Just to make sure: That means the HW has already detected a STOP
condition on the bus?

> ---
>  drivers/i2c/busses/i2c-bcm-iproc.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
> index 30efb7913b2e..b58224b7ba79 100644
> --- a/drivers/i2c/busses/i2c-bcm-iproc.c
> +++ b/drivers/i2c/busses/i2c-bcm-iproc.c
> @@ -360,6 +360,9 @@ static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c,
>  			value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK);
>  			i2c_slave_event(iproc_i2c->slave,
>  					I2C_SLAVE_WRITE_RECEIVED, &value);
> +			if (rx_status == I2C_SLAVE_RX_END)
> +				i2c_slave_event(iproc_i2c->slave,
> +						I2C_SLAVE_STOP, &value);
>  		}
>  	} else if (status & BIT(IS_S_TX_UNDERRUN_SHIFT)) {
>  		/* Master read other than start */
> -- 
> 2.17.1
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux