Get the interconnect paths for SPI based Serial Engine device
and vote according to the current bus speed of the driver.
Signed-off-by: Akash Asthana <akashast@xxxxxxxxxxxxxx>
---
- As per Bjorn's comment, removed se == NULL check from geni_spi_icc_get
- As per Bjorn's comment, removed code to set se->icc_path* to NULL in failure
- As per Bjorn's comment, introduced and using devm_of_icc_get API for getting
path handle
- As per Matthias comment, added error handling for icc_set_bw call
drivers/spi/spi-geni-qcom.c | 74 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 73 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index c397242..09c4709 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -118,6 +118,19 @@ static int get_spi_clk_cfg(unsigned int speed_hz,
return ret;
}
+static int geni_spi_icc_get(struct geni_se *se)
+{
+ se->icc_path_geni_to_core = devm_of_icc_get(se->dev, "qup-core");
+ if (IS_ERR(se->icc_path_geni_to_core))
+ return PTR_ERR(se->icc_path_geni_to_core);
+
+ se->icc_path_cpu_to_geni = devm_of_icc_get(se->dev, "qup-config");
+ if (IS_ERR(se->icc_path_cpu_to_geni))
+ return PTR_ERR(se->icc_path_cpu_to_geni);
+
+ return 0;
+}
+
static void handle_fifo_timeout(struct spi_master *spi,
struct spi_message *msg)
{
@@ -234,6 +247,20 @@ static int setup_fifo_params(struct spi_device *spi_slv,
return ret;
}
+ /*
+ * Set BW quota for CPU as driver supports FIFO mode only.
+ * Assume peak bw as twice of avg bw.
+ */
+ se->avg_bw_cpu = Bps_to_icc(mas->cur_speed_hz);
+ se->peak_bw_cpu = Bps_to_icc(2 * mas->cur_speed_hz);
+ ret = icc_set_bw(se->icc_path_cpu_to_geni, se->avg_bw_cpu,
+ se->peak_bw_cpu);
+ if (ret) {
+ dev_err(mas->dev, "%s: ICC BW voting failed for cpu\n",
+ __func__);
+ return ret;
+ }
+
clk_sel = idx & CLK_SEL_MSK;
m_clk_cfg = (div << CLK_DIV_SHFT) | SER_CLK_EN;
spi_setup_word_len(mas, spi_slv->mode, spi_slv->bits_per_word);
@@ -578,6 +605,15 @@ static int spi_geni_probe(struct platform_device *pdev)
spin_lock_init(&mas->lock);
pm_runtime_enable(dev);
+ ret = geni_spi_icc_get(&mas->se);
+ if (ret)
+ goto spi_geni_probe_runtime_disable;
+ /* Set the bus quota to a reasonable value for register access */
+ mas->se.avg_bw_core = Bps_to_icc(CORE_2X_50_MHZ);
+ mas->se.peak_bw_core = Bps_to_icc(CORE_2X_100_MHZ);
+ mas->se.avg_bw_cpu = Bps_to_icc(1000);
+ mas->se.peak_bw_cpu = Bps_to_icc(1000);
+
ret = spi_geni_init(mas);
if (ret)
goto spi_geni_probe_runtime_disable;
@@ -616,14 +652,50 @@ static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
{
struct spi_master *spi = dev_get_drvdata(dev);
struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ int ret;
+
+ ret = geni_se_resources_off(&mas->se);
+ if (ret)
+ return ret;
- return geni_se_resources_off(&mas->se);
+ ret = icc_set_bw(mas->se.icc_path_geni_to_core, 0, 0);
+ if (ret) {
+ dev_err_ratelimited(mas->dev, "%s: ICC BW remove failed for core\n",
+ __func__);
+ return ret;
+ }
+
+ ret = icc_set_bw(mas->se.icc_path_cpu_to_geni, 0, 0);
+ if (ret) {
+ dev_err_ratelimited(mas->dev, "%s: ICC BW remove failed for cpu\n",
+ __func__);
+ return ret;
+ }
+
+ return 0;
}
static int __maybe_unused spi_geni_runtime_resume(struct device *dev)
{
struct spi_master *spi = dev_get_drvdata(dev);
struct spi_geni_master *mas = spi_master_get_devdata(spi);
+ int ret;
+
+ ret = icc_set_bw(mas->se.icc_path_geni_to_core, mas->se.avg_bw_core,
+ mas->se.peak_bw_core);
+ if (ret) {
+ dev_err_ratelimited(mas->dev, "%s: ICC BW voting failed for core\n",
+ __func__);
+ return ret;
+ }
+
+ ret = icc_set_bw(mas->se.icc_path_cpu_to_geni, mas->se.avg_bw_cpu,
+ mas->se.peak_bw_cpu);
+ if (ret) {
+ dev_err_ratelimited(mas->dev, "%s: ICC BW voting failed for cpu\n",
+ __func__);
+ return ret;
+ }
return geni_se_resources_on(&mas->se);
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
