From: Todor Tomov <todor.tomov@xxxxxxxxxx>
Add DT binding document for Qualcomm Camera Control Interface (CCI)
I2C controller.
Signed-off-by: Todor Tomov <todor.tomov@xxxxxxxxxx>
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
v2: Fix subnode properties, remove mandatory clock names
v3: Add sdm845 compatible string
.../devicetree/bindings/i2c/i2c-qcom-cci.txt | 92 ++++++++++++++++++++++
1 file changed, 92 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
new file mode 100644
index 0000000..c6668b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
@@ -0,0 +1,92 @@
+Qualcomm Camera Control Interface (CCI) I2C controller
+
+PROPERTIES:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,msm8916-cci"
+ "qcom,msm8996-cci"
+ "qcom,sdm845-cci"
+
+- reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: base address CCI I2C controller and length of memory
+ mapped region.
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: specifies the CCI I2C interrupt. The format of the
+ specifier is defined by the binding document describing
+ the node's interrupt parent.
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: a list of phandle, should contain an entry for each
+ entries in clock-names.
+
+- clock-names
+ Usage: required
+ Value type: <string>
+ Definition: a list of clock names, must include "cci" clock.
+
+- power-domains
+ Usage: required for "qcom,msm8996-cci"
+ Value type: <prop-encoded-array>
+ Definition:
+
+SUBNODES:
+
+The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996 and
+sdm845), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
+
+PROPERTIES:
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: Index of the CCI bus/master
+
+- clock-frequency:
+ Usage: optional
+ Value type: <u32>
+ Definition: Desired I2C bus clock frequency in Hz, defaults to 100
+ kHz if omitted.
+
+Example:
+
+ cci@a0c000 {
+ compatible = "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xa0c000 0x1000>;
+ interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
+ <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_CCI_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>;
+ clock-names = "mmss_mmagic_ahb",
+ "camss_top_ahb",
+ "cci_ahb",
+ "cci",
+ "camss_ahb";
+
+ i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
--
2.7.4
