Re: [PATCH 02/89] dt-bindings: i2c: brcmstb: Add BCM2711 BSC/AUTO-I2C binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/24/20 1:06 AM, Maxime Ripard wrote:
> The HDMI blocks in the BCM2771 have an i2c controller to retrieve the
> EDID. This block is split into two parts, the BSC and the AUTO_I2C,
> lying in two separate register areas.
> 
> The AUTO_I2C block has a mailbox-like interface and will take away the
> BSC control from the CPU if enabled. However, the BSC is the actually
> the same controller than the one supported by the brcmstb driver, and
> the AUTO_I2C doesn't really bring any immediate benefit.
> 
> We can model it in the DT as a single device with two register range,
> which will allow us to use or or the other in the driver without
> changing anything in the DT.
> 
> Cc: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
> Cc: Florian Fainelli <f.fainelli@xxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
> Cc: bcm-kernel-feedback-list@xxxxxxxxxxxx
> Cc: linux-i2c@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>

Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
-- 
Florian



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux