Since we have generic definitions for bus frequencies, let's use them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-sh_mobile.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 82b3b795e0bd..dc29a29904df 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -145,9 +145,6 @@ struct sh_mobile_dt_config {
#define IIC_FLAG_HAS_ICIC67 (1 << 0)
-#define STANDARD_MODE 100000
-#define FAST_MODE 400000
-
/* Register offsets */
#define ICDR 0x00
#define ICCR 0x04
@@ -270,11 +267,11 @@ static int sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd)
i2c_clk_khz = clk_get_rate(pd->clk) / 1000 / pd->clks_per_count;
- if (pd->bus_speed == STANDARD_MODE) {
+ if (pd->bus_speed == I2C_STANDARD_MODE_FREQ) {
tLOW = 47; /* tLOW = 4.7 us */
tHIGH = 40; /* tHD;STA = tHIGH = 4.0 us */
tf = 3; /* tf = 0.3 us */
- } else if (pd->bus_speed == FAST_MODE) {
+ } else if (pd->bus_speed == I2C_FAST_MODE_FREQ) {
tLOW = 13; /* tLOW = 1.3 us */
tHIGH = 6; /* tHD;STA = tHIGH = 0.6 us */
tf = 3; /* tf = 0.3 us */
@@ -851,7 +848,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
return PTR_ERR(pd->reg);
ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed);
- pd->bus_speed = (ret || !bus_speed) ? STANDARD_MODE : bus_speed;
+ pd->bus_speed = (ret || !bus_speed) ? I2C_STANDARD_MODE_FREQ : bus_speed;
pd->clks_per_count = 1;
/* Newer variants come with two new bits in ICIC */
--
2.25.0
