Since we have generic definitions for bus frequencies, let's use them.
Cc: Heiko Stuebner <heiko@xxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-rk3x.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 1a33007b03e9..a621f747009b 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -539,9 +539,9 @@ static irqreturn_t rk3x_i2c_irq(int irqno, void *dev_id)
*/
static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed)
{
- if (speed <= 100000)
+ if (speed <= I2C_STANDARD_MODE_FREQ)
return &standard_mode_spec;
- else if (speed <= 400000)
+ else if (speed <= I2C_FAST_MODE_FREQ)
return &fast_mode_spec;
else
return &fast_mode_plus_spec;
@@ -578,8 +578,8 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate,
int ret = 0;
/* Only support standard-mode and fast-mode */
- if (WARN_ON(t->bus_freq_hz > 400000))
- t->bus_freq_hz = 400000;
+ if (WARN_ON(t->bus_freq_hz > I2C_FAST_MODE_FREQ))
+ t->bus_freq_hz = I2C_FAST_MODE_FREQ;
/* prevent scl_rate_khz from becoming 0 */
if (WARN_ON(t->bus_freq_hz < 1000))
@@ -758,8 +758,8 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
int ret = 0;
/* Support standard-mode, fast-mode and fast-mode plus */
- if (WARN_ON(t->bus_freq_hz > 1000000))
- t->bus_freq_hz = 1000000;
+ if (WARN_ON(t->bus_freq_hz > I2C_FAST_MODE_PLUS_FREQ))
+ t->bus_freq_hz = I2C_FAST_MODE_PLUS_FREQ;
/* prevent scl_rate_khz from becoming 0 */
if (WARN_ON(t->bus_freq_hz < 1000))
--
2.25.0
