[PATCH v1 32/40] i2c: stm32f4: Use generic definitions for bus frequencies

[Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>]

Since we have generic definitions for bus frequencies, let's use them.

Cc: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
Cc: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
Cc: Alexandre Torgue <alexandre.torgue@xxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-stm32f4.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
index ba600d77a3f8..0a67b44f2755 100644
--- a/drivers/i2c/busses/i2c-stm32f4.c
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -91,7 +91,6 @@
 #define STM32F4_I2C_MIN_STANDARD_FREQ	2U
 #define STM32F4_I2C_MIN_FAST_FREQ	6U
 #define STM32F4_I2C_MAX_FREQ		46U
-#define HZ_TO_MHZ			1000000
 
 /**
  * struct stm32f4_i2c_msg - client specific data
@@ -154,7 +153,7 @@ static int stm32f4_i2c_set_periph_clk_freq(struct stm32f4_i2c_dev *i2c_dev)
 	u32 cr2 = 0;
 
 	i2c_dev->parent_rate = clk_get_rate(i2c_dev->clk);
-	freq = DIV_ROUND_UP(i2c_dev->parent_rate, HZ_TO_MHZ);
+	freq = DIV_ROUND_UP(i2c_dev->parent_rate, HZ_PER_MHZ);
 
 	if (i2c_dev->speed == STM32_I2C_SPEED_STANDARD) {
 		/*
@@ -190,7 +189,7 @@ static int stm32f4_i2c_set_periph_clk_freq(struct stm32f4_i2c_dev *i2c_dev)
 
 static void stm32f4_i2c_set_rise_time(struct stm32f4_i2c_dev *i2c_dev)
 {
-	u32 freq = DIV_ROUND_UP(i2c_dev->parent_rate, HZ_TO_MHZ);
+	u32 freq = DIV_ROUND_UP(i2c_dev->parent_rate, HZ_PER_MHZ);
 	u32 trise;
 
 	/*
@@ -243,7 +242,7 @@ static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev)
 		 * parent rate is not higher than 46 MHz . As a result val
 		 * is at most 8 bits wide and so fits into the CCR bits [11:0].
 		 */
-		val = i2c_dev->parent_rate / (100000 << 1);
+		val = i2c_dev->parent_rate / (I2C_STANDARD_MODE_FREQ << 1);
 	} else {
 		/*
 		 * In fast mode, we compute CCR with duty = 0 as with low
@@ -263,7 +262,7 @@ static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev)
 		 * parent rate is not higher than 46 MHz . As a result val
 		 * is at most 6 bits wide and so fits into the CCR bits [11:0].
 		 */
-		val = DIV_ROUND_UP(i2c_dev->parent_rate, 400000 * 3);
+		val = DIV_ROUND_UP(i2c_dev->parent_rate, I2C_FAST_MODE_FREQ * 3);
 
 		/* Select Fast mode */
 		ccr |= STM32F4_I2C_CCR_FS;
@@ -807,7 +806,7 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 
 	i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
 	ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
-	if (!ret && clk_rate >= 400000)
+	if (!ret && clk_rate >= I2C_FAST_MODE_FREQ)
 		i2c_dev->speed = STM32_I2C_SPEED_FAST;
 
 	i2c_dev->dev = &pdev->dev;
-- 
2.25.0