Since we have generic definitions for bus frequencies, let's use them. Cc: Ard Biesheuvel <ardb@xxxxxxxxxx> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/i2c/busses/i2c-synquacer.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c index 86026798b4f7..ccd2ed4fa2f1 100644 --- a/drivers/i2c/busses/i2c-synquacer.c +++ b/drivers/i2c/busses/i2c-synquacer.c @@ -67,10 +67,10 @@ /* STANDARD MODE frequency */ #define SYNQUACER_I2C_CLK_MASTER_STD(rate) \ - DIV_ROUND_UP(DIV_ROUND_UP((rate), 100000) - 2, 2) + DIV_ROUND_UP(DIV_ROUND_UP((rate), I2C_STANDARD_MODE_FREQ) - 2, 2) /* FAST MODE frequency */ #define SYNQUACER_I2C_CLK_MASTER_FAST(rate) \ - DIV_ROUND_UP((DIV_ROUND_UP((rate), 400000) - 2) * 2, 3) + DIV_ROUND_UP((DIV_ROUND_UP((rate), I2C_FAST_MODE_FREQ) - 2) * 2, 3) /* (clkrate <= 18000000) */ /* calculate the value of CS bits in CCR register on standard mode */ @@ -111,11 +111,11 @@ & SYNQUACER_I2C_CSR_CS_MASK) /* min I2C clock frequency 14M */ -#define SYNQUACER_I2C_MIN_CLK_RATE (14 * 1000000) +#define SYNQUACER_I2C_MIN_CLK_RATE (14 * HZ_PER_MHZ) /* max I2C clock frequency 200M */ -#define SYNQUACER_I2C_MAX_CLK_RATE (200 * 1000000) +#define SYNQUACER_I2C_MAX_CLK_RATE (200 * HZ_PER_MHZ) /* I2C clock frequency 18M */ -#define SYNQUACER_I2C_CLK_RATE_18M (18 * 1000000) +#define SYNQUACER_I2C_CLK_RATE_18M (18 * HZ_PER_MHZ) #define SYNQUACER_I2C_SPEED_FM 400 // Fast Mode #define SYNQUACER_I2C_SPEED_SM 100 // Standard Mode @@ -602,7 +602,7 @@ static int synquacer_i2c_probe(struct platform_device *pdev) i2c->adapter.nr = pdev->id; init_completion(&i2c->completion); - if (bus_speed < 400000) + if (bus_speed < I2C_FAST_MODE_FREQ) i2c->speed_khz = SYNQUACER_I2C_SPEED_SM; else i2c->speed_khz = SYNQUACER_I2C_SPEED_FM; -- 2.25.0
