Since we have generic definitions for bus frequencies, let's use them.
Cc: Patrice Chotard <patrice.chotard@xxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-st.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index 54e1fc8a495e..441fc2245f25 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -213,7 +213,7 @@ static inline void st_i2c_clr_bits(void __iomem *reg, u32 mask)
*/
static struct st_i2c_timings i2c_timings[] = {
[I2C_MODE_STANDARD] = {
- .rate = 100000,
+ .rate = I2C_STANDARD_MODE_FREQ,
.rep_start_hold = 4400,
.rep_start_setup = 5170,
.start_hold = 4400,
@@ -222,7 +222,7 @@ static struct st_i2c_timings i2c_timings[] = {
.bus_free_time = 5170,
},
[I2C_MODE_FAST] = {
- .rate = 400000,
+ .rate = I2C_FAST_MODE_FREQ,
.rep_start_hold = 660,
.rep_start_setup = 660,
.start_hold = 660,
@@ -835,7 +835,7 @@ static int st_i2c_probe(struct platform_device *pdev)
i2c_dev->mode = I2C_MODE_STANDARD;
ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
- if ((!ret) && (clk_rate == 400000))
+ if (!ret && (clk_rate == I2C_FAST_MODE_FREQ))
i2c_dev->mode = I2C_MODE_FAST;
i2c_dev->dev = &pdev->dev;
--
2.25.0
