Re: [PATCH 1/3] i2c: qcom-geni: Let firmware specify irq trigger flags

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Feb 4, 2020 at 11:31 AM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
>
> We don't need to force IRQF_TRIGGER_HIGH here as the DT or ACPI tables
> should take care of this for us. Just use 0 instead so that we use the
> flags from the firmware. Also, remove specify dev_name() for the irq
> name so that we can get better information in /proc/interrupts about
> which device is generating interrupts.
>
> Cc: Girish Mahadevan <girishm@xxxxxxxxxxxxxx>
> Cc: Dilip Kota <dkota@xxxxxxxxxxxxxx>
> Cc: Alok Chauhan <alokc@xxxxxxxxxxxxxx>
> Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-qcom-geni.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux