We don't need to force IRQF_TRIGGER_HIGH here as the DT or ACPI tables
should take care of this for us. Just use 0 instead so that we use the
flags from the firmware. Also, remove specify dev_name() for the irq
name so that we can get better information in /proc/interrupts about
which device is generating interrupts.
Cc: Girish Mahadevan <girishm@xxxxxxxxxxxxxx>
Cc: Dilip Kota <dkota@xxxxxxxxxxxxxx>
Cc: Alok Chauhan <alokc@xxxxxxxxxxxxxx>
Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-qcom-geni.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 17abf60c94ae..3e13b54ce3f8 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -549,8 +549,8 @@ static int geni_i2c_probe(struct platform_device *pdev)
init_completion(&gi2c->done);
spin_lock_init(&gi2c->lock);
platform_set_drvdata(pdev, gi2c);
- ret = devm_request_irq(&pdev->dev, gi2c->irq, geni_i2c_irq,
- IRQF_TRIGGER_HIGH, "i2c_geni", gi2c);
+ ret = devm_request_irq(dev, gi2c->irq, geni_i2c_irq, 0,
+ dev_name(&pdev->dev), gi2c);
if (ret) {
dev_err(&pdev->dev, "Request_irq failed:%d: err:%d\n",
gi2c->irq, ret);
--
Sent by a computer, using git, on the internet
