Re: [v3,1/2] dt-bindings: i2c: support property idle-state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 16, 2019 at 12:09:19PM +0800, Biwen Li wrote:
> This supports property idle-state

The subject should indicate this is just for pca954x.

> 
> Signed-off-by: Biwen Li <biwen.li@xxxxxxx>
> ---
> Change in v3:
> 	- update subject and description
> 	- add some information for property idle-state
> 
> Change in v2:
> 	- update subject and description
> 	- add property idle-state
> 
>  Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
> index 30ac6a60f041..7abda506b828 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
> @@ -25,6 +25,8 @@ Required Properties:
>  Optional Properties:
>  
>    - reset-gpios: Reference to the GPIO connected to the reset input.
> +  - idle-state: if present, overrides i2c-mux-idle-disconnect,
> +    Please refer to Documentation/devicetree/bindings/mux/mux-controller.txt
>    - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
>      children in idle state. This is necessary for example, if there are several
>      multiplexers on the bus and the devices behind them use same I2C addresses.
> -- 
> 2.17.1
> 



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux