This replaces property i2c-mux-idle-disconnect with idle-state Signed-off-by: Biwen Li <biwen.li@xxxxxxx> --- Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt index 30ac6a60f041..f2db517b1635 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt @@ -25,9 +25,7 @@ Required Properties: Optional Properties: - reset-gpios: Reference to the GPIO connected to the reset input. - - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all - children in idle state. This is necessary for example, if there are several - multiplexers on the bus and the devices behind them use same I2C addresses. + - idle-state: Please refer to Documentation/devicetree/bindings/mux/mux-controller.txt - interrupts: Interrupt mapping for IRQ. - interrupt-controller: Marks the device node as an interrupt controller. - #interrupt-cells : Should be two. -- 2.17.1
