RE: [EXT] Re: [v2] ACPI: support for NXP i2c controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



、> 
> Caution: EXT Email
> 
> On Fri, Sep 6, 2019 at 11:03 AM Biwen Li <biwen.li@xxxxxxx> wrote:
> >
> > From: Chuanhua Han <chuanhua.han@xxxxxxx>
> >
> > Enable NXP i2c controller to boot with ACPI
> >
> 
> Thanks, the code looks good to me,
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> 
> though...
> 
> > Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@xxxxxxx>
> > Signed-off-by: Udit Kumar <udit.kumar@xxxxxxx>
> > Signed-off-by: Chuanhua Han <chuanhua.han@xxxxxxx>
> 
> This SoB chain is a bit odd. Who is the author of this? The first SoB in the chain
> usually points to the first (main) author. There is also possible to change that,
> though in that case for the rest we now use Co-developed-by tag rather than
> SoB.
> In any case, if Rafael and Wolfram are okay with this, I have no objections.
Thanks.
> 
> > Signed-off-by: Biwen Li <biwen.li@xxxxxxx>
> > ---
> > Change in v2:
> >         - Simplify code
> >         - Adjust header file order
> >         - Not use ACPI_PTR()
> >
> >  drivers/acpi/acpi_apd.c      |  7 +++++++
> >  drivers/i2c/busses/i2c-imx.c | 17 +++++++++++++----
> >  2 files changed, 20 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c index
> > 7cd0c9ac71ea..71511ae2dfcd 100644
> > --- a/drivers/acpi/acpi_apd.c
> > +++ b/drivers/acpi/acpi_apd.c
> > @@ -160,11 +160,17 @@ static const struct apd_device_desc
> hip08_i2c_desc = {
> >         .setup = acpi_apd_setup,
> >         .fixed_clk_rate = 250000000,
> >  };
> > +
> >  static const struct apd_device_desc thunderx2_i2c_desc = {
> >         .setup = acpi_apd_setup,
> >         .fixed_clk_rate = 125000000,
> >  };
> >
> > +static const struct apd_device_desc nxp_i2c_desc = {
> > +       .setup = acpi_apd_setup,
> > +       .fixed_clk_rate = 350000000,
> > +};
> > +
> >  static const struct apd_device_desc hip08_spi_desc = {
> >         .setup = acpi_apd_setup,
> >         .fixed_clk_rate = 250000000,
> > @@ -238,6 +244,7 @@ static const struct acpi_device_id
> acpi_apd_device_ids[] = {
> >         { "HISI02A1", APD_ADDR(hip07_i2c_desc) },
> >         { "HISI02A2", APD_ADDR(hip08_i2c_desc) },
> >         { "HISI0173", APD_ADDR(hip08_spi_desc) },
> > +       { "NXP0001", APD_ADDR(nxp_i2c_desc) },
> >  #endif
> >         { }
> >  };
> > diff --git a/drivers/i2c/busses/i2c-imx.c
> > b/drivers/i2c/busses/i2c-imx.c index 15f6cde6452f..a3b61336fe55 100644
> > --- a/drivers/i2c/busses/i2c-imx.c
> > +++ b/drivers/i2c/busses/i2c-imx.c
> > @@ -20,6 +20,7 @@
> >   *
> >   */
> >
> > +#include <linux/acpi.h>
> >  #include <linux/clk.h>
> >  #include <linux/completion.h>
> >  #include <linux/delay.h>
> > @@ -255,6 +256,12 @@ static const struct of_device_id i2c_imx_dt_ids[]
> > = {  };  MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
> >
> > +static const struct acpi_device_id i2c_imx_acpi_ids[] = {
> > +       {"NXP0001", .driver_data = (kernel_ulong_t)&vf610_i2c_hwdata},
> > +       { }
> > +};
> > +MODULE_DEVICE_TABLE(acpi, i2c_imx_acpi_ids);
> > +
> >  static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)  {
> >         return i2c_imx->hwdata->devtype == IMX1_I2C; @@ -1048,14
> > +1055,13 @@ static const struct i2c_algorithm i2c_imx_algo = {
> >
> >  static int i2c_imx_probe(struct platform_device *pdev)  {
> > -       const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids,
> > -
> &pdev->dev);
> >         struct imx_i2c_struct *i2c_imx;
> >         struct resource *res;
> >         struct imxi2c_platform_data *pdata =
> dev_get_platdata(&pdev->dev);
> >         void __iomem *base;
> >         int irq, ret;
> >         dma_addr_t phy_addr;
> > +       const struct imx_i2c_hwdata *match;
> >
> >         dev_dbg(&pdev->dev, "<%s>\n", __func__);
> >
> > @@ -1075,8 +1081,9 @@ static int i2c_imx_probe(struct platform_device
> *pdev)
> >         if (!i2c_imx)
> >                 return -ENOMEM;
> >
> > -       if (of_id)
> > -               i2c_imx->hwdata = of_id->data;
> > +       match = device_get_match_data(&pdev->dev);
> > +       if (match)
> > +               i2c_imx->hwdata = match;
> >         else
> >                 i2c_imx->hwdata = (struct imx_i2c_hwdata *)
> >
> platform_get_device_id(pdev)->driver_data;
> > @@ -1089,6 +1096,7 @@ static int i2c_imx_probe(struct platform_device
> *pdev)
> >         i2c_imx->adapter.nr             = pdev->id;
> >         i2c_imx->adapter.dev.of_node    = pdev->dev.of_node;
> >         i2c_imx->base                   = base;
> > +       ACPI_COMPANION_SET(&i2c_imx->adapter.dev,
> ACPI_COMPANION(&pdev->dev));
> >
> >         /* Get I2C clock */
> >         i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
> > @@ -1247,6 +1255,7 @@ static struct platform_driver i2c_imx_driver = {
> >                 .name = DRIVER_NAME,
> >                 .pm = &i2c_imx_pm_ops,
> >                 .of_match_table = i2c_imx_dt_ids,
> > +               .acpi_match_table = i2c_imx_acpi_ids,
> >         },
> >         .id_table = imx_i2c_devtype,
> >  };
> > --
> > 2.17.1
> >
> 
> 
> --
> With Best Regards,
> Andy Shevchenko




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux