RE: [PATCH v3 0/2] i2c: designware: Add support for a bus clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sorry, the email below was sent prematurely and will be resent shortly.

-Gareth

> On 20 February 2019 13:26 Gareth Williams wrote:
> The Synopsys I2C Controller has a bus clock that some SoCs require to access
> the registers. This series also details the new clock property in the bindings
> documentation.
>
> v3:
>  - busclk renamed to pclk.
>  - Added comment with dw_i2c_dev struct definition describing pclk.
>  - Added enable rollback of first clock if second fails to enable.
>  - Changed clocks and clock-names sections to use term "peripheral clock"
>    (pclk) instead of "bus clock" (busclk) in dt-bindings documentation.
> v2:
>  - Use new devm_clk_get_optional() function as it simplifies handling when
>    the optional clock is not present.
>
> Phil Edworthy (2):
>   dt: snps,designware-i2c: Add clock bindings documentation
>   i2c: designware: Add support for a bus clock
>
>  .../devicetree/bindings/i2c/i2c-designware.txt         |  9 +++++++++
>  drivers/i2c/busses/i2c-designware-common.c             | 18
> ++++++++++++++++--
>  drivers/i2c/busses/i2c-designware-core.h               |  2 ++
>  drivers/i2c/busses/i2c-designware-platdrv.c            |  5 +++++
>  4 files changed, 32 insertions(+), 2 deletions(-)
>
> --
> 2.7.4



Renesas Electronics Europe GmbH,Geschaeftsfuehrer/President : Michael Hannawald, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany,Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux