Re: [PATCH v15] i2c: Add drivers for the AMD PCIe MP2 I2C controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 Hi Bjorn and Wolfram,
On 2/7/2019 9:23 PM, Wolfram Sang wrote:
> Hi Bjorn,
> 
> thanks a lot for your additional information!
> 
>> IMHO the split into two drivers is a bit of a mess and doesn't really
>> correspond with the hardware, as I mentioned at [1].  The PCI device
>> is the real hardware and the driver should claim that.  AFAICT the
>> ACPI device exists only to pass some config information to the PCI
>> driver.  I think the natural approach would be for the PCI driver to
>> directly search the ACPI namespace for that config information.
> 
> AFAIR the AMD folks insisted on the two driver setup because they need
> it in the future? Maybe they can explain again here?
> 
>> The fact that driver_find_device() is essentially unused except for a
>> few very special cases is a good clue that there's probably a better
>> way.
> 
> Excactly this thinking made me recommend something else, too. Let's see
> what we can come up with.

First of really thanks for your valuable review. It may seem to be illogical to have two separate drivers, however as explained
in past we are working on another solution for some upcoming thing. In that case we need MP2-PCI communication driver which will be reused.
At this point of time i can't talk much about that but once solution is ready, we will be pushing that as well. Hence i sincerely requesting
to  have two separate driver.

For rest of remaining comments will look into the same. Elie hope you will also have a look and we will have a common understanding.


> Thanks,
> 
>    Wolfram
> 


Thanks for consideration and your understanding.

Regards
Nehal Shah




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux