Re: [PATCH V14 3/5] i2c: tegra: Add DMA support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



07.02.2019 18:17, Sowjanya Komatineni пишет:
>>>
>>>> @@ -1124,6 +1453,10 @@ static int tegra_i2c_probe(struct platform_device *pdev)
>>>>  		}
>>>>  	}
>>>>  
>>>> +	ret = tegra_i2c_init_dma(i2c_dev);
>>>> +	if (ret < 0)
>>>> +		goto disable_div_clk;
>>>> +
>>>>  	ret = tegra_i2c_init(i2c_dev);
>>>>  	if (ret) {
>>>>  		dev_err(&pdev->dev, "Failed to initialize i2c controller\n");
>>>
>>>
>>> Missing DMA resourcing release on probe failure.
>>
> If probe fails due to other reasons, then I2C interface will not be available and boot will not even happen.
> Do we need DMA resourcing release?
> Probe can fail due to timeout or from pm_runtime.. and if i2c fails lots of things don’t happen properly and doesn’t boot.
> 
> Will add but want to check..
> 

1) There is no guarantee that other error cases won't return -EPROBE_DEFER.

2) I2C driver could be compiled as a module.

3) It is simply a bad programming practice to leak resources.



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux