06.02.2019 16:17, Sowjanya Komatineni пишет: > > >>>> BTW, I'm seeing "atmel_mxt_ts 0-004c: Warning: Info CRC error - device=0xF436DC file=0x000000" whithout making any modifications to the original patch as well and it shall not happen, hence there is bug somewhere. Probably FIFO triggers are still not set up correctly... ? >>>> >>>> >>> In snippet you sent, I see you are forcing dma_burst to 1 always which is what set for fifo trigger levels as well and also you are forcing dma all the time. >>> So always it will be 1 word dma burst and 1 word trigger level and that should not be an issue. >>> >> >> I reverted that snippet, this log is collected with the yours original patch. >> > From atmel driver, looks like this warning is from maxt_update_cfg and due to CRC mismatch and above values shows read data CRC is 0Xf436dc which is compared against info_crc of all 0's > Info_crc is based on raw config file and somehow its all 0's. this is not based on data read thru i2c. > data->info_crc computed on data read is 0Xf436dc > > This warning is not related to I2C transfer > It doesn't happen with the I2C PIO mode. Seems it means that the I2C reads out the 0xF436DC value instead of 0x000000.. if I'm not missing anything.
