Hi Peter,
> > This driver adds I2C bus driver to communicate with Type-C controller.
> > I2C client driver will be part of USB Type-C UCSI driver.
> >
> > Signed-off-by: Ajay Gupta <ajayg@xxxxxxxxxx>
> > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> > Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> > ---
> > Changes from v1 -> v2
> > None
> > Changes from v2 -> v3
> > Fixed review comments from Andy and Thierry
> > Rename i2c-gpu.c -> i2c-nvidia-gpu.c
> > Changes from v3 -> v4
> > Fixed review comments from Andy
> > Changes from v4 -> v5
> > Fixed review comments from Andy
> > Changes from v5 -> v6
> > None
> > Changes from v6 -> v7 -> v8
> > Fixed review comments from Peter
> > - Add implicit STOP for last write message
> > - Add i2c_adapter_quirks with max_read_len and
> > I2C_AQ_COMB flags
> > Changes from v8 -> v9
> > Fixed review comments from Peter
> > - Drop do_start flag
> > - Use i2c_8bit_addr_from_msg()
> > Changes from v9 -> v10
> > Fixed review comments from Peter
> > - Dropped I2C_FUNC_SMBUS_EMUL
> > - Dropped local mutex
> > Changes from v10 -> v11
> > Fixed review comments from Peter
> > - Moved stop in master_xfer at end of message
> > - Change i2c_read without STOP
> > - Dropped I2C_AC_COMB* flags
> > Changes from v11 -> v12
> > Fixed review comments from Peter
> > - Removed clearing of empty bits
> > - Fix master_xfer for correct stop use
> >
> > Documentation/i2c/busses/i2c-nvidia-gpu | 18 ++
> > MAINTAINERS | 7 +
> > drivers/i2c/busses/Kconfig | 9 +
> > drivers/i2c/busses/Makefile | 1 +
> > drivers/i2c/busses/i2c-nvidia-gpu.c | 368
> ++++++++++++++++++++++++++++++++
> > 5 files changed, 403 insertions(+)
> > create mode 100644 Documentation/i2c/busses/i2c-nvidia-gpu
> > create mode 100644 drivers/i2c/busses/i2c-nvidia-gpu.c
> >
> > diff --git a/Documentation/i2c/busses/i2c-nvidia-gpu
> > b/Documentation/i2c/busses/i2c-nvidia-gpu
> > new file mode 100644
> > index 0000000..31884d2
> > --- /dev/null
> > +++ b/Documentation/i2c/busses/i2c-nvidia-gpu
> > @@ -0,0 +1,18 @@
> > +Kernel driver i2c-nvidia-gpu
> > +
> > +Datasheet: not publicly available.
> > +
> > +Authors:
> > + Ajay Gupta <ajayg@xxxxxxxxxx>
> > +
> > +Description
> > +-----------
> > +
> > +i2c-nvidia-gpu is a driver for I2C controller included in NVIDIA
> > +Turing and later GPUs and it is used to communicate with Type-C controller
> on GPUs.
> > +
> > +If your 'lspci -v' listing shows something like the following,
> > +
> > +01:00.3 Serial bus controller [0c80]: NVIDIA Corporation Device 1ad9
> > +(rev a1)
> > +
> > +then this driver should support the I2C controller of your GPU.
> > diff --git a/MAINTAINERS b/MAINTAINERS index d870cb5..b71b0b4 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -6798,6 +6798,13 @@ L: linux-acpi@xxxxxxxxxxxxxxx
> > S: Maintained
> > F: drivers/i2c/i2c-core-acpi.c
> >
> > +I2C CONTROLLER DRIVER FOR NVIDIA GPU
> > +M: Ajay Gupta <ajayg@xxxxxxxxxx>
> > +L: linux-i2c@xxxxxxxxxxxxxxx
> > +S: Maintained
> > +F: Documentation/i2c/busses/i2c-nvidia-gpu
> > +F: drivers/i2c/busses/i2c-nvidia-gpu.c
> > +
> > I2C MUXES
> > M: Peter Rosin <peda@xxxxxxxxxx>
> > L: linux-i2c@xxxxxxxxxxxxxxx
> > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> > index 451d4ae..eed827b 100644
> > --- a/drivers/i2c/busses/Kconfig
> > +++ b/drivers/i2c/busses/Kconfig
> > @@ -224,6 +224,15 @@ config I2C_NFORCE2_S4985
> > This driver can also be built as a module. If so, the module
> > will be called i2c-nforce2-s4985.
> >
> > +config I2C_NVIDIA_GPU
> > + tristate "NVIDIA GPU I2C controller"
> > + depends on PCI
> > + help
> > + If you say yes to this option, support will be included for the
> > + NVIDIA GPU I2C controller which is used to communicate with the
> GPU's
> > + Type-C controller. This driver can also be built as a module called
> > + i2c-nvidia-gpu.
> > +
> > config I2C_SIS5595
> > tristate "SiS 5595"
> > depends on PCI
> > diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> > index 18b26af..d499813 100644
> > --- a/drivers/i2c/busses/Makefile
> > +++ b/drivers/i2c/busses/Makefile
> > @@ -140,5 +140,6 @@ obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
> > obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o
> > obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
> > obj-$(CONFIG_I2C_FSI) += i2c-fsi.o
> > +obj-$(CONFIG_I2C_NVIDIA_GPU) += i2c-nvidia-gpu.o
> >
> > ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG diff --git
> > a/drivers/i2c/busses/i2c-nvidia-gpu.c
> > b/drivers/i2c/busses/i2c-nvidia-gpu.c
> > new file mode 100644
> > index 0000000..0c16b0a
> > --- /dev/null
> > +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
> > @@ -0,0 +1,368 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Nvidia GPU I2C controller Driver
> > + *
> > + * Copyright (C) 2018 NVIDIA Corporation. All rights reserved.
> > + * Author: Ajay Gupta <ajayg@xxxxxxxxxx> */ #include <linux/delay.h>
> > +#include <linux/i2c.h> #include <linux/interrupt.h> #include
> > +<linux/module.h> #include <linux/pci.h> #include
> > +<linux/platform_device.h> #include <linux/pm.h> #include
> > +<linux/pm_runtime.h>
> > +
> > +#include <asm/unaligned.h>
> > +
> > +/* I2C definitions */
> > +#define I2C_MST_CNTL 0x00
> > +#define I2C_MST_CNTL_GEN_START BIT(0)
> > +#define I2C_MST_CNTL_GEN_STOP BIT(1)
> > +#define I2C_MST_CNTL_CMD_READ (1 << 2)
> > +#define I2C_MST_CNTL_CMD_WRITE (2 << 2)
> > +#define I2C_MST_CNTL_BURST_SIZE_SHIFT 6
> > +#define I2C_MST_CNTL_GEN_NACK BIT(28)
> > +#define I2C_MST_CNTL_STATUS GENMASK(30, 29)
> > +#define I2C_MST_CNTL_STATUS_OKAY (0 << 29)
> > +#define I2C_MST_CNTL_STATUS_NO_ACK (1 << 29)
> > +#define I2C_MST_CNTL_STATUS_TIMEOUT (2 << 29)
> > +#define I2C_MST_CNTL_STATUS_BUS_BUSY (3 << 29)
> > +#define I2C_MST_CNTL_CYCLE_TRIGGER BIT(31)
> > +
> > +#define I2C_MST_ADDR 0x04
> > +
> > +#define I2C_MST_I2C0_TIMING 0x08
> > +#define I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ 0x10e
> > +#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT 16
> > +#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX 255
> > +#define I2C_MST_I2C0_TIMING_TIMEOUT_CHECK BIT(24)
> > +
> > +#define I2C_MST_DATA 0x0c
> > +
> > +#define I2C_MST_HYBRID_PADCTL 0x20
> > +#define I2C_MST_HYBRID_PADCTL_MODE_I2C BIT(0)
> > +#define I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV
> BIT(14)
> > +#define I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV
> BIT(15)
> > +
> > +struct gpu_i2c_dev {
> > + struct device *dev;
> > + void __iomem *regs;
> > + struct i2c_adapter adapter;
> > + struct i2c_board_info *gpu_ccgx_ucsi; };
> > +
> > +static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd) {
> > + u32 val;
> > +
> > + /* enable I2C */
> > + val = readl(i2cd->regs + I2C_MST_HYBRID_PADCTL);
> > + val |= I2C_MST_HYBRID_PADCTL_MODE_I2C |
> > + I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV |
> > + I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV;
> > + writel(val, i2cd->regs + I2C_MST_HYBRID_PADCTL);
> > +
> > + /* enable 100KHZ mode */
> > + val = I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ;
> > + val |= (I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX
> > + << I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT);
> > + val |= I2C_MST_I2C0_TIMING_TIMEOUT_CHECK;
> > + writel(val, i2cd->regs + I2C_MST_I2C0_TIMING); }
> > +
> > +static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd) {
> > + unsigned long target = jiffies + msecs_to_jiffies(1000);
> > + u32 val;
> > +
> > + do {
> > + val = readl(i2cd->regs + I2C_MST_CNTL);
> > + if (!(val & I2C_MST_CNTL_CYCLE_TRIGGER))
>
> It occurred to me that generating NACK only makes sense for reads, and that
> you only want to have a NACK after the final byte in a read messages. So,
> here's a new attempt.
>
> What if you replace the above test with
>
> if (!(val & I2C_MST_CNTL_READ))
>
> (since all cycle-triggers are also reads, at least currently, and we also want to
> wait for the tail reads to complete before we try to get the received data from
> the register)
>
> and then...
>
> > + break;
> > + if ((val & I2C_MST_CNTL_STATUS) !=
> > + I2C_MST_CNTL_STATUS_BUS_BUSY)
> > + break;
> > + usleep_range(1000, 2000);
> > + } while (time_is_after_jiffies(target));
> > +
> > + if (time_is_before_jiffies(target)) {
> > + dev_err(i2cd->dev, "i2c timeout error %x\n", val);
> > + return -ETIME;
> > + }
> > +
> > + val = readl(i2cd->regs + I2C_MST_CNTL);
> > + switch (val & I2C_MST_CNTL_STATUS) {
> > + case I2C_MST_CNTL_STATUS_OKAY:
> > + return 0;
> > + case I2C_MST_CNTL_STATUS_NO_ACK:
> > + return -EIO;
> > + case I2C_MST_CNTL_STATUS_TIMEOUT:
> > + return -ETIME;
> > + case I2C_MST_CNTL_STATUS_BUS_BUSY:
> > + return -EBUSY;
> > + default:
> > + return 0;
> > + }
> > +}
> > +
> > +static int gpu_i2c_read(struct gpu_i2c_dev *i2cd, u8 *data, u16 len)
> > +{
> > + int status;
> > + u32 val;
> > +
> > + val = I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_CMD_READ |
> > + (len << I2C_MST_CNTL_BURST_SIZE_SHIFT) |
> > + I2C_MST_CNTL_CYCLE_TRIGGER |
> I2C_MST_CNTL_GEN_NACK;
> > + writel(val, i2cd->regs + I2C_MST_CNTL);
> > +
> > + status = gpu_i2c_check_status(i2cd);
> > + if (status < 0)
> > + return status;
> > +
> > + val = readl(i2cd->regs + I2C_MST_DATA);
> > + switch (len) {
> > + case 1:
> > + data[0] = val;
> > + break;
> > + case 2:
> > + put_unaligned_be16(val, data);
> > + break;
> > + case 3:
> > + put_unaligned_be16(val >> 8, data);
> > + data[2] = val;
> > + break;
> > + case 4:
> > + put_unaligned_be32(val, data);
> > + break;
> > + default:
> > + break;
> > + }
> > + return status;
> > +}
>
> ...replace your gpu_i2c_read with this:
>
> #define GPU_MAX_BURST 1
> static int gpu_i2c_read(struct gpu_i2c_dev *i2cd, u8 *data, u16 len) {
> u16 burst = min(len, GPU_MAX_BURST);
> int status;
> u32 val;
>
> val = I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_CMD_READ |
> (burst << I2C_MST_CNTL_BURST_SIZE_SHIFT) |
> I2C_MST_CNTL_CYCLE_TRIGGER;
>
> for (;;) {
> if (len <= GPU_MAX_BURST)
> val |= I2C_MST_CNTL_GEN_NACK;
> writel(val, i2cd->regs + I2C_MST_CNTL);
>
> status = gpu_i2c_check_status(i2cd);
> if (status < 0)
> return status;
>
> val = readl(i2cd->regs + I2C_MST_DATA);
> switch (burst) {
> case 1:
> data[0] = val;
> break;
> case 2:
> put_unaligned_be16(val, data);
> break;
> case 3:
> put_unaligned_be16(val >> 8, data);
> data[2] = val;
> break;
> case 4:
> put_unaligned_be32(val, data);
> break;
> default:
> break;
> }
>
> if (len <= GPU_MAX_BURST)
> break;
>
> data += GPU_MAX_BURST;
> len -= GPU_MAX_BURST;
>
> burst = min(len, GPU_MAX_BURST);
> val = I2C_MST_CNTL_CMD_READ |
> (burst << I2C_MST_CNTL_BURST_SIZE_SHIFT);
> }
>
> return status;
> }
>
> If that works,
> then change GPU_MAX_BURST to 4, drop the quirk and the
> splitting of the reads in patch 2/2 and check that too...
>
> *fingers crossed*
Unfortunately, that also didn't work. I tried some tweaks with _TRIGGER
and _START but that also didn't help.
> > +
> > +static int gpu_i2c_start(struct gpu_i2c_dev *i2cd) {
> > + writel(I2C_MST_CNTL_GEN_START, i2cd->regs + I2C_MST_CNTL);
> > + return gpu_i2c_check_status(i2cd);
> > +}
> > +
> > +static int gpu_i2c_stop(struct gpu_i2c_dev *i2cd) {
> > + writel(I2C_MST_CNTL_GEN_STOP, i2cd->regs + I2C_MST_CNTL);
> > + return gpu_i2c_check_status(i2cd);
> > +}
> > +
> > +static int gpu_i2c_write(struct gpu_i2c_dev *i2cd, u8 data) {
> > + u32 val;
> > +
> > + writel(data, i2cd->regs + I2C_MST_DATA);
> > +
> > + val = I2C_MST_CNTL_CMD_WRITE | (1 <<
> I2C_MST_CNTL_BURST_SIZE_SHIFT) |
> > + I2C_MST_CNTL_GEN_NACK;
>
> Generating NACK for a write does not make sense, which is what I think the
> last flag means? It's the client device that has the power to ACK/NACK writes.
Ok, will check.
> > + writel(val, i2cd->regs + I2C_MST_CNTL);
> > +
> > + return gpu_i2c_check_status(i2cd);
> > +}
> > +
> > +static int gpu_i2c_master_xfer(struct i2c_adapter *adap,
> > + struct i2c_msg *msgs, int num) {
> > + struct gpu_i2c_dev *i2cd = i2c_get_adapdata(adap);
> > + int status, status2;
> > + int i, j;
> > +
> > + for (i = 0; i < num; i++) {
> > + if (msgs[i].flags & I2C_M_RD) {
> > + /* program client address before starting read */
> > + writel(msgs[i].addr, i2cd->regs + I2C_MST_ADDR);
> > + /* gpu_i2c_read has implicit start */
> > + status = gpu_i2c_read(i2cd, msgs[i].buf, msgs[i].len);
> > + if (status < 0) {
> > + if (i == 0)
> > + return status;
>
> I missed this in my first reply to this message. You want an unconditional
> "goto stop" here, so please drop the "if (i == 0) return status;" thing.
> My reasoning is that a spurious stop is - while undesirable - much better than
> a missing stop.
Ok.
> > + goto stop;
> > + }
> > + } else {
> > + u8 addr = i2c_8bit_addr_from_msg(msgs + i);
> > +
> > + status = gpu_i2c_start(i2cd);
> > + if (status < 0) {
> > + if (i == 0)
> > + return status;
> > + goto stop;
> > + }
> > +
> > + status = gpu_i2c_write(i2cd, addr);
> > + if (status < 0)
> > + goto stop;
> > +
> > + for (j = 0; j < msgs[i].len; j++) {
> > + status = gpu_i2c_write(i2cd, msgs[i].buf[j]);
> > + if (status < 0)
> > + goto stop;
> > + }
> > + }
> > + }
> > + status = gpu_i2c_stop(i2cd);
> > + if (status < 0)
> > + return status;
> > + return i;
> > +stop:
> > + status2 = gpu_i2c_stop(i2cd);
> > + if (status2 < 0)
> > + dev_err(i2cd->dev, "i2c stop failed %d\n", status2);
> > + return status;
> > +}
> > +
> > +static const struct i2c_adapter_quirks gpu_i2c_quirks = {
> > + .max_read_len = 4,
> > +};
> > +
> > +static u32 gpu_i2c_functionality(struct i2c_adapter *adap) {
> > + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; }
> > +
> > +static const struct i2c_algorithm gpu_i2c_algorithm = {
> > + .master_xfer = gpu_i2c_master_xfer,
> > + .functionality = gpu_i2c_functionality,
> > +};
> > +
> > +/*
> > + * This driver is for Nvidia GPU cards with USB Type-C interface.
> > + * We want to identify the cards using vendor ID and class code only
> > + * to avoid dependency of adding product id for any new card which
> > + * requires this driver.
> > + * Currently there is no class code defined for UCSI device over PCI
> > + * so using UNKNOWN class for now and it will be updated when UCSI
> > + * over PCI gets a class code.
> > + * There is no other NVIDIA cards with UNKNOWN class code. Even if
> > +the
> > + * driver gets loaded for an undesired card then eventually
> > +i2c_read()
> > + * (initiated from UCSI i2c_client) will timeout or UCSI commands
> > +will
> > + * timeout.
> > + */
> > +#define PCI_CLASS_SERIAL_UNKNOWN 0x0c80
> > +static const struct pci_device_id gpu_i2c_ids[] = {
> > + { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
> > + PCI_CLASS_SERIAL_UNKNOWN << 8, 0xffffff00},
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
> > +
> > +static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq) {
> > + struct i2c_client *ccgx_client;
> > +
> > + i2cd->gpu_ccgx_ucsi = devm_kzalloc(i2cd->dev,
> > + sizeof(struct i2c_board_info),
>
> I prefer sizeof(*i2cd->gpu_ccgx_ucsi). Especially when the type is far away as
> it is here...
First one looks more readable and cleaner to me but will change.
sizeof(struct i2c_board_info),
sizeof(*i2cd->gpu_ccgx_ucsi),
> > + GFP_KERNEL);
> > + if (!i2cd->gpu_ccgx_ucsi)
> > + return -ENOMEM;
> > +
> > + strlcpy(i2cd->gpu_ccgx_ucsi->type, "ccgx-ucsi",
> > + sizeof(i2cd->gpu_ccgx_ucsi->type));
> > + i2cd->gpu_ccgx_ucsi->addr = 0x8;
> > + i2cd->gpu_ccgx_ucsi->irq = irq;
> > + ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
> > + if (!ccgx_client)
> > + return -ENODEV;
> > +
> > + return 0;
> > +}
> > +
> > +static int gpu_i2c_probe(struct pci_dev *pdev, const struct
> > +pci_device_id *id) {
> > + struct gpu_i2c_dev *i2cd;
> > + int status;
> > +
> > + i2cd = devm_kzalloc(&pdev->dev, sizeof(struct gpu_i2c_dev),
> > +GFP_KERNEL);
>
> While at it, you might as well change this to sizeof(*i2cd), and
Ok.
> please check for the pattern in patch 2/2.
I hope you saw the latest response at [1]. The change works on multiple
systems and no error has been reported yet.
What else (and how) to check ?
[1] https://marc.info/?l=linux-usb&m=153667127502959&w=2
Thanks
Ajay
--nvpublic
>
> Cheers,
> Peter
>
> > + if (!i2cd)
> > + return -ENOMEM;
> > +
> > + i2cd->dev = &pdev->dev;
> > + dev_set_drvdata(&pdev->dev, i2cd);
> > +
> > + status = pcim_enable_device(pdev);
> > + if (status < 0) {
> > + dev_err(&pdev->dev, "pcim_enable_device failed %d\n",
> status);
> > + return status;
> > + }
> > +
> > + pci_set_master(pdev);
> > +
> > + i2cd->regs = pcim_iomap(pdev, 0, 0);
> > + if (!i2cd->regs) {
> > + dev_err(&pdev->dev, "pcim_iomap failed\n");
> > + return -ENOMEM;
> > + }
> > +
> > + status = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
> > + if (status < 0) {
> > + dev_err(&pdev->dev, "pci_alloc_irq_vectors err %d\n",
> status);
> > + return status;
> > + }
> > +
> > + gpu_enable_i2c_bus(i2cd);
> > +
> > + i2c_set_adapdata(&i2cd->adapter, i2cd);
> > + i2cd->adapter.owner = THIS_MODULE;
> > + strlcpy(i2cd->adapter.name, "NVIDIA GPU I2C adapter",
> > + sizeof(i2cd->adapter.name));
> > + i2cd->adapter.algo = &gpu_i2c_algorithm;
> > + i2cd->adapter.quirks = &gpu_i2c_quirks;
> > + i2cd->adapter.dev.parent = &pdev->dev;
> > + status = i2c_add_adapter(&i2cd->adapter);
> > + if (status < 0)
> > + goto free_irq_vectors;
> > +
> > + status = gpu_populate_client(i2cd, pdev->irq);
> > + if (status < 0) {
> > + dev_err(&pdev->dev, "gpu_populate_client failed %d\n",
> status);
> > + goto del_adapter;
> > + }
> > +
> > + return 0;
> > +
> > +del_adapter:
> > + i2c_del_adapter(&i2cd->adapter);
> > +free_irq_vectors:
> > + pci_free_irq_vectors(pdev);
> > + return status;
> > +}
> > +
> > +static void gpu_i2c_remove(struct pci_dev *pdev) {
> > + struct gpu_i2c_dev *i2cd = dev_get_drvdata(&pdev->dev);
> > +
> > + i2c_del_adapter(&i2cd->adapter);
> > + pci_free_irq_vectors(pdev);
> > +}
> > +
> > +static int gpu_i2c_resume(struct device *dev) {
> > + struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev);
> > +
> > + gpu_enable_i2c_bus(i2cd);
> > + return 0;
> > +}
> > +
> > +UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, NULL, gpu_i2c_resume,
> NULL);
> > +
> > +static struct pci_driver gpu_i2c_driver = {
> > + .name = "nvidia-gpu",
> > + .id_table = gpu_i2c_ids,
> > + .probe = gpu_i2c_probe,
> > + .remove = gpu_i2c_remove,
> > + .driver = {
> > + .pm = &gpu_i2c_driver_pm,
> > + },
> > +};
> > +
> > +module_pci_driver(gpu_i2c_driver);
> > +
> > +MODULE_AUTHOR("Ajay Gupta <ajayg@xxxxxxxxxx>");
> > +MODULE_DESCRIPTION("Nvidia GPU I2C controller Driver");
> > +MODULE_LICENSE("GPL v2");
> >
