This commit adds 'idle-wait-timeout-ms' setting which can be used for bus idle waiting logic in multi-master environment. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/i2c/i2c-aspeed.txt | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt index 8fbd8633a387..42ecaaf67172 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt @@ -13,9 +13,13 @@ Required Properties: - interrupts : interrupt number Optional Properties: -- bus-frequency : frequency of the bus clock in Hz defaults to 100 kHz when not - specified -- multi-master : states that there is another master active on this bus. +- bus-frequency : frequency of the bus clock in Hz defaults to 100 kHz + when not specified +- multi-master : states that there is another master active on this + bus. +- idle-wait-timeout-ms : bus idle waiting timeout in milliseconds when + multi-master is set, defaults to 100 ms when not + specified. Example: -- 2.18.0
