On 2018-09-07 19:15, Ajay Gupta wrote:
> Hi Peter,
>>> Signed-off-by: Ajay Gupta <ajayg@xxxxxxxxxx>
>>> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
>>> Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
>>> ---
>>> Changes from v1 -> v2
>>> None
>>> Changes from v2 -> v3
>>> Fixed review comments from Andy and Thierry
>>> Rename i2c-gpu.c -> i2c-nvidia-gpu.c
>>> Changes from v3 -> v4
>>> Fixed review comments from Andy
>>> Changes from v4 -> v5
>>> Fixed review comments from Andy
>>> Changes from v5 -> v6
>>> None
>>> Changes from v6 -> v7 -> v8
>>> Fixed review comments from Peter
>>> - Add implicit STOP for last write message
>>> - Add i2c_adapter_quirks with max_read_len and
>>> I2C_AQ_COMB flags
>>> Changes from v8 -> v9
>>> Fixed review comments from Peter
>>> - Drop do_start flag
>>> - Use i2c_8bit_addr_from_msg()
>>>
>>> Documentation/i2c/busses/i2c-nvidia-gpu | 18 ++
>>> MAINTAINERS | 7 +
>>> drivers/i2c/busses/Kconfig | 9 +
>>> drivers/i2c/busses/Makefile | 1 +
>>> drivers/i2c/busses/i2c-nvidia-gpu.c | 396
>> ++++++++++++++++++++++++++++++++
>>> 5 files changed, 431 insertions(+)
>>> create mode 100644 Documentation/i2c/busses/i2c-nvidia-gpu
>>> create mode 100644 drivers/i2c/busses/i2c-nvidia-gpu.c
>>>
>>> diff --git a/Documentation/i2c/busses/i2c-nvidia-gpu
>>> b/Documentation/i2c/busses/i2c-nvidia-gpu
>>> new file mode 100644
>>> index 0000000..31884d2
>>> --- /dev/null
>>> +++ b/Documentation/i2c/busses/i2c-nvidia-gpu
>>> @@ -0,0 +1,18 @@
>>> +Kernel driver i2c-nvidia-gpu
>>> +
>>> +Datasheet: not publicly available.
>>> +
>>> +Authors:
>>> + Ajay Gupta <ajayg@xxxxxxxxxx>
>>> +
>>> +Description
>>> +-----------
>>> +
>>> +i2c-nvidia-gpu is a driver for I2C controller included in NVIDIA
>>> +Turing and later GPUs and it is used to communicate with Type-C controller
>> on GPUs.
>>> +
>>> +If your 'lspci -v' listing shows something like the following,
>>> +
>>> +01:00.3 Serial bus controller [0c80]: NVIDIA Corporation Device 1ad9
>>> +(rev a1)
>>> +
>>> +then this driver should support the I2C controller of your GPU.
>>> diff --git a/MAINTAINERS b/MAINTAINERS index 9ad052a..2d1c5a1 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -6797,6 +6797,13 @@ L: linux-acpi@xxxxxxxxxxxxxxx
>>> S: Maintained
>>> F: drivers/i2c/i2c-core-acpi.c
>>>
>>> +I2C CONTROLLER DRIVER FOR NVIDIA GPU
>>> +M: Ajay Gupta <ajayg@xxxxxxxxxx>
>>> +L: linux-i2c@xxxxxxxxxxxxxxx
>>> +S: Maintained
>>> +F: Documentation/i2c/busses/i2c-nvidia-gpu
>>> +F: drivers/i2c/busses/i2c-nvidia-gpu.c
>>> +
>>> I2C MUXES
>>> M: Peter Rosin <peda@xxxxxxxxxx>
>>> L: linux-i2c@xxxxxxxxxxxxxxx
>>> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
>>> index 451d4ae..eed827b 100644
>>> --- a/drivers/i2c/busses/Kconfig
>>> +++ b/drivers/i2c/busses/Kconfig
>>> @@ -224,6 +224,15 @@ config I2C_NFORCE2_S4985
>>> This driver can also be built as a module. If so, the module
>>> will be called i2c-nforce2-s4985.
>>>
>>> +config I2C_NVIDIA_GPU
>>> + tristate "NVIDIA GPU I2C controller"
>>> + depends on PCI
>>> + help
>>> + If you say yes to this option, support will be included for the
>>> + NVIDIA GPU I2C controller which is used to communicate with the
>> GPU's
>>> + Type-C controller. This driver can also be built as a module called
>>> + i2c-nvidia-gpu.
>>> +
>>> config I2C_SIS5595
>>> tristate "SiS 5595"
>>> depends on PCI
>>> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
>>> index 18b26af..d499813 100644
>>> --- a/drivers/i2c/busses/Makefile
>>> +++ b/drivers/i2c/busses/Makefile
>>> @@ -140,5 +140,6 @@ obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
>>> obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o
>>> obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
>>> obj-$(CONFIG_I2C_FSI) += i2c-fsi.o
>>> +obj-$(CONFIG_I2C_NVIDIA_GPU) += i2c-nvidia-gpu.o
>>>
>>> ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG diff --git
>>> a/drivers/i2c/busses/i2c-nvidia-gpu.c
>>> b/drivers/i2c/busses/i2c-nvidia-gpu.c
>>> new file mode 100644
>>> index 0000000..4a63a4e4
>>> --- /dev/null
>>> +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
>>> @@ -0,0 +1,396 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Nvidia GPU I2C controller Driver
>>> + *
>>> + * Copyright (C) 2018 NVIDIA Corporation. All rights reserved.
>>> + * Author: Ajay Gupta <ajayg@xxxxxxxxxx> */ #include <linux/delay.h>
>>> +#include <linux/i2c.h> #include <linux/interrupt.h> #include
>>> +<linux/module.h> #include <linux/pci.h> #include
>>> +<linux/platform_device.h> #include <linux/pm.h> #include
>>> +<linux/pm_runtime.h>
>>> +
>>> +#include <asm/unaligned.h>
>>> +
>>> +/* I2C definitions */
>>> +#define I2C_MST_CNTL 0x00
>>> +#define I2C_MST_CNTL_GEN_START BIT(0)
>>> +#define I2C_MST_CNTL_GEN_STOP BIT(1)
>>> +#define I2C_MST_CNTL_CMD_NONE (0 << 2)
>>> +#define I2C_MST_CNTL_CMD_READ (1 << 2)
>>> +#define I2C_MST_CNTL_CMD_WRITE (2 << 2)
>>> +#define I2C_MST_CNTL_GEN_RAB BIT(4)
>>> +#define I2C_MST_CNTL_BURST_SIZE_SHIFT 6
>>> +#define I2C_MST_CNTL_GEN_NACK BIT(28)
>>> +#define I2C_MST_CNTL_STATUS GENMASK(30, 29)
>>> +#define I2C_MST_CNTL_STATUS_OKAY (0 << 29)
>>> +#define I2C_MST_CNTL_STATUS_NO_ACK (1 << 29)
>>> +#define I2C_MST_CNTL_STATUS_TIMEOUT (2 << 29)
>>> +#define I2C_MST_CNTL_STATUS_BUS_BUSY (3 << 29)
>>> +#define I2C_MST_CNTL_CYCLE_TRIGGER BIT(31)
>>> +
>>> +#define I2C_MST_ADDR 0x04
>>> +#define I2C_MST_ADDR_DAB 0
>>> +
>>> +#define I2C_MST_I2C0_TIMING 0x08
>>> +#define I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ 0x10e
>>> +#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT 16
>>> +#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX 255
>>> +#define I2C_MST_I2C0_TIMING_TIMEOUT_CHECK BIT(24)
>>> +
>>> +#define I2C_MST_DATA 0x0c
>>> +
>>> +#define I2C_MST_HYBRID_PADCTL 0x20
>>> +#define I2C_MST_HYBRID_PADCTL_MODE_I2C BIT(0)
>>> +#define I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV
>> BIT(14)
>>> +#define I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV
>> BIT(15)
>>> +
>>> +struct gpu_i2c_dev {
>>> + struct device *dev;
>>> + void __iomem *regs;
>>> + struct i2c_adapter adapter;
>>> + struct i2c_client *client;
>>> + struct mutex mutex; /* to sync read/write */
>>
>> Hmm, what do you need to sync read/write with?
> What if there are multiple clients and each of them wants to use I2C bus for read/write?
> Even in UCSI client, user may want to change alt mode which will result in read/write
> request in a thread. So we have to synchronize between UCSI ISR and the user thread.
Synchronization of reads/writes from multiple clients is handled by the I2C core and the
adapter lock. Lock in i2c_transfer() for the details.
>> The only thing I can find is
>> that busy-check in gpu_i2c_idle, but can runtime-pm really try to idle an
>> adapter that has an xfer in flight? If that's the case, what stops a new xfer from
>> being initiated after runtime-pm has checked if
>> ->runtime_idle returns ok but before the device is really suspended?
>>
>> PM is not an area I'm familiar with, so it's an honest question.
>>
>>> +};
>>> +
>>> +static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd) {
>>> + u32 val;
>>> +
>>> + /* enable I2C */
>>> + val = readl(i2cd->regs + I2C_MST_HYBRID_PADCTL);
>>> + val |= I2C_MST_HYBRID_PADCTL_MODE_I2C |
>>> + I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV |
>>> + I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV;
>>> + writel(val, i2cd->regs + I2C_MST_HYBRID_PADCTL);
>>> +
>>> + /* enable 100KHZ mode */
>>> + val = I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ;
>>> + val |= (I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX
>>> + << I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT);
>>> + val |= I2C_MST_I2C0_TIMING_TIMEOUT_CHECK;
>>> + writel(val, i2cd->regs + I2C_MST_I2C0_TIMING); }
>>> +
>>> +static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd) {
>>> + unsigned long target = jiffies + msecs_to_jiffies(1000);
>>> + u32 val;
>>> +
>>> + do {
>>> + val = readl(i2cd->regs + I2C_MST_CNTL);
>>> + if (!(val & I2C_MST_CNTL_CYCLE_TRIGGER))
>>> + break;
>>> + if ((val & I2C_MST_CNTL_STATUS) !=
>>> + I2C_MST_CNTL_STATUS_BUS_BUSY)
>>> + break;
>>> + usleep_range(1000, 2000);
>>> + } while (time_is_after_jiffies(target));
>>> + if (time_is_before_jiffies(target)) {
>>> + dev_err(i2cd->dev, "i2c timeout error %x\n", val);
>>> + return -EIO;
>>> + }
>>> +
>>> + val = readl(i2cd->regs + I2C_MST_CNTL);
>>> + switch (val & I2C_MST_CNTL_STATUS) {
>>> + case I2C_MST_CNTL_STATUS_OKAY:
>>> + return 0;
>>> + case I2C_MST_CNTL_STATUS_NO_ACK:
>>> + return -EIO;
>>> + case I2C_MST_CNTL_STATUS_TIMEOUT:
>>> + return -ETIME;
>>> + case I2C_MST_CNTL_STATUS_BUS_BUSY:
>>> + return -EBUSY;
>>> + default:
>>> + return 0;
>>> + }
>>> +}
>>> +
>>> +static int gpu_i2c_read(struct gpu_i2c_dev *i2cd, u8 *data, u16 len)
>>> +{
>>> + int status;
>>> + u32 val;
>>> +
>>> + val = I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_GEN_STOP |
>>> + I2C_MST_CNTL_CMD_READ | (len <<
>> I2C_MST_CNTL_BURST_SIZE_SHIFT) |
>>> + I2C_MST_CNTL_CYCLE_TRIGGER |
>> I2C_MST_CNTL_GEN_NACK;
>>> + val &= ~I2C_MST_CNTL_GEN_RAB;
>>> + writel(val, i2cd->regs + I2C_MST_CNTL);
>>> +
>>> + status = gpu_i2c_check_status(i2cd);
>>> + if (status < 0)
>>> + return status;
>>> +
>>> + val = readl(i2cd->regs + I2C_MST_DATA);
>>> + switch (len) {
>>> + case 1:
>>> + data[0] = val;
>>> + break;
>>> + case 2:
>>> + put_unaligned_be16(val, data);
>>> + break;
>>> + case 3:
>>> + put_unaligned_be16(val >> 8, data);
>>> + data[2] = val;
>>> + break;
>>> + case 4:
>>> + put_unaligned_be32(val, data);
>>> + break;
>>> + default:
>>> + break;
>>> + }
>>> + return status;
>>> +}
>>> +
>>> +static int gpu_i2c_start(struct gpu_i2c_dev *i2cd, u16 addr) {
>>> + u32 val;
>>> +
>>> + val = addr << I2C_MST_ADDR_DAB;
>>> + writel(val, i2cd->regs + I2C_MST_ADDR);
>>> +
>>> + val = I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_CMD_NONE |
>>> + I2C_MST_CNTL_GEN_NACK;
>>> + val &= ~(I2C_MST_CNTL_GEN_STOP | I2C_MST_CNTL_GEN_RAB);
>>> + writel(val, i2cd->regs + I2C_MST_CNTL);
>>> +
>>> + return gpu_i2c_check_status(i2cd);
>>> +}
>>> +
>>> +static int gpu_i2c_stop(struct gpu_i2c_dev *i2cd) {
>>> + u32 val;
>>> +
>>> + val = I2C_MST_CNTL_GEN_STOP | I2C_MST_CNTL_CMD_NONE |
>>> + I2C_MST_CNTL_GEN_NACK;
>>> + val &= ~(I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_GEN_RAB);
>>> + writel(val, i2cd->regs + I2C_MST_CNTL);
>>> +
>>> + return gpu_i2c_check_status(i2cd);
>>> +}
>>> +
>>> +static int gpu_i2c_write(struct gpu_i2c_dev *i2cd, u8 data) {
>>> + u32 val;
>>> +
>>> + writel(data, i2cd->regs + I2C_MST_DATA);
>>> +
>>> + val = I2C_MST_CNTL_CMD_WRITE | (1 <<
>> I2C_MST_CNTL_BURST_SIZE_SHIFT) |
>>> + I2C_MST_CNTL_GEN_NACK;
>>> + val &= ~(I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_GEN_STOP |
>>> + I2C_MST_CNTL_GEN_RAB);
>>> + writel(val, i2cd->regs + I2C_MST_CNTL);
>>> +
>>> + return gpu_i2c_check_status(i2cd);
>>> +}
>>> +
>>> +static int gpu_i2c_master_xfer(struct i2c_adapter *adap,
>>> + struct i2c_msg *msgs, int num) {
>>> + struct gpu_i2c_dev *i2cd = i2c_get_adapdata(adap);
>>> + int status;
>>> + int i, j;
>>> +
>>> + mutex_lock(&i2cd->mutex);
>>> + for (i = 0; i < num; i++) {
>>> + if (msgs[i].flags & I2C_M_RD) {
>>> + /* gpu_i2c_read has implicit start and stop */
>>> + status = gpu_i2c_read(i2cd, msgs[i].buf, msgs[i].len);
>>
>> Per your comments on v8, the address has to be programmed before the
>> transfer, but you fail to do that if the first message is a read.
> This will never happen. Hint: I2C_AQ_COMB_WRITE_FIRST
Yes, it will. If the transfer consists of a single read, i.e. w/o
any leading write. E.g. i2c_smbus_read_byte (which is emulated in your
case and will generate this pattern).
>> Is the I2C_MST_ADDR register really in the loop when you do a write?
> That’s not needed. We need to write I2C_MST_ADDR once before starting
> one or more transfers to a client.
>
>> Because
>> I think it would simplify things if you could move the write to the
>> I2C_MST_ADDR register to be in gpu_i2c_read instead of in gpu_i2c_start. Or,
>> maybe just write to I2C_MST_ADDR before the for-loop in this function.
> See above. Hint: I2C_AQ_COMB_WRITE_FIRST
>
>>> + if (status < 0)
>>> + goto unlock;
>>> + } else {
>>> + /* start on first write message */
>>> + if (i == 0) {
>>
>> You do not issue a restart nor do you write the address to the bus for the
>> second message, if it's a write.
> That’s not needed. We need to write I2C_MST_ADDR once before starting
> one or more transfers to a client.
>
>> That makes me wonder if this patch was
>> tested, because AFAICT ccg_write in patch 2/2 uses xfers combining two write
>> messages and I fail to see how that can work?
> See above.
>
>> Also, have you verified if gpu_i2c_start really issues a restart instead of a stop
>> followed by a start if the bus is not idle on function entry?
> Yes. Hint: refer gpu_i2_start() and look for I2C_MST_CNTL_GEN_STOP bit.
Yes, I see that you mask out that bit, but my question was if that actually
behaves as we wish and that we in fact do get a restart instead of a stop/start.
> Thanks
> Ajay
> --
> nvpublic
> --
>> Or is the
>> documentation clear on this detail? Might be worth checking anyway, as
>> documentation is not always completely correct...
>>
>> Cheers,
>> Peter
>>
>>> + u8 addr = i2c_8bit_addr_from_msg(msgs + i);
>>> + status = gpu_i2c_start(i2cd, msgs[i].addr);
>>> + if (status < 0)
>>> + goto unlock;
>>> +
>>> + status = gpu_i2c_write(i2cd, addr);
>>> + if (status < 0)
>>> + goto stop;
>>> + }
>>> + for (j = 0; j < msgs[i].len; j++) {
>>> + status = gpu_i2c_write(i2cd, msgs[i].buf[j]);
>>> + if (status < 0)
>>> + goto stop;
>>> + }
>>> + /* stop if last write message */
>>> + if (i == (num - 1)) {
>>> + status = gpu_i2c_stop(i2cd);
>>> + if (status < 0)
>>> + goto unlock;
>>> + }
>>> + }
>>> + }
>>> + status = i;
>>> + goto unlock;
>>> +stop:
>>> + status = gpu_i2c_stop(i2cd);
>>> +unlock:
>>> + mutex_unlock(&i2cd->mutex);
>>> + return status;
>>> +}
>>> +
>>> +static const struct i2c_adapter_quirks gpu_i2c_quirks = {
>>> + .flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST |
>> I2C_AQ_COMB_SAME_ADDR,
>>> + .max_read_len = 4,
>>> +};
>>> +
>>> +static u32 gpu_i2c_functionality(struct i2c_adapter *adap) {
>>> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; }
>>> +
>>> +static const struct i2c_algorithm gpu_i2c_algorithm = {
>>> + .master_xfer = gpu_i2c_master_xfer,
>>> + .functionality = gpu_i2c_functionality,
>>> +};
>>> +
>>> +/*
>>> + * This driver is for Nvidia GPU cards with USB Type-C interface.
>>> + * We want to identify the cards using vendor ID and class code only
>>> + * to avoid dependency of adding product id for any new card which
>>> + * requires this driver.
>>> + * Currently there is no class code defined for UCSI device over PCI
>>> + * so using UNKNOWN class for now and it will be updated when UCSI
>>> + * over PCI gets a class code.
>>> + * There is no other NVIDIA cards with UNKNOWN class code. Even if
>>> +the
>>> + * driver gets loaded for an undesired card then eventually
>>> +i2c_read()
>>> + * (initiated from UCSI i2c_client) will timeout or UCSI commands
>>> +will
>>> + * timeout.
>>> + */
>>> +#define PCI_CLASS_SERIAL_UNKNOWN 0x0c80
>>> +static const struct pci_device_id gpu_i2c_ids[] = {
>>> + { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
>>> + PCI_CLASS_SERIAL_UNKNOWN << 8, 0xffffff00},
>>> + { }
>>> +};
>>> +MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
>>> +
>>> +static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq) {
>>> + static struct i2c_board_info gpu_ccgx_ucsi = {
>>> + I2C_BOARD_INFO("ccgx-ucsi", 0x8),
>>> + };
>>> +
>>> + gpu_ccgx_ucsi.irq = irq;
>>> + i2cd->client = i2c_new_device(&i2cd->adapter, &gpu_ccgx_ucsi);
>>> + if (!i2cd->client) {
>>> + dev_err(i2cd->dev, "i2c_new_device failed\n");
>>> + return -ENODEV;
>>> + }
>>> + return 0;
>>> +}
>>> +
>>> +static int gpu_i2c_probe(struct pci_dev *pdev, const struct
>>> +pci_device_id *id) {
>>> + struct gpu_i2c_dev *i2cd;
>>> + int status;
>>> +
>>> + i2cd = devm_kzalloc(&pdev->dev, sizeof(struct gpu_i2c_dev),
>> GFP_KERNEL);
>>> + if (!i2cd)
>>> + return -ENOMEM;
>>> +
>>> + i2cd->dev = &pdev->dev;
>>> + dev_set_drvdata(&pdev->dev, i2cd);
>>> +
>>> + status = pcim_enable_device(pdev);
>>> + if (status < 0) {
>>> + dev_err(&pdev->dev, "pcim_enable_device failed %d\n",
>> status);
>>> + return status;
>>> + }
>>> +
>>> + pci_set_master(pdev);
>>> +
>>> + i2cd->regs = pcim_iomap(pdev, 0, 0);
>>> + if (!i2cd->regs) {
>>> + dev_err(&pdev->dev, "pcim_iomap failed\n");
>>> + return -ENOMEM;
>>> + }
>>> +
>>> + status = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
>>> + if (status < 0) {
>>> + dev_err(&pdev->dev, "pci_alloc_irq_vectors err %d\n",
>> status);
>>> + return status;
>>> + }
>>> +
>>> + mutex_init(&i2cd->mutex);
>>> + gpu_enable_i2c_bus(i2cd);
>>> +
>>> + i2c_set_adapdata(&i2cd->adapter, i2cd);
>>> + i2cd->adapter.owner = THIS_MODULE;
>>> + strlcpy(i2cd->adapter.name, "NVIDIA GPU I2C adapter",
>>> + sizeof(i2cd->adapter.name));
>>> + i2cd->adapter.algo = &gpu_i2c_algorithm;
>>> + i2cd->adapter.quirks = &gpu_i2c_quirks;
>>> + i2cd->adapter.dev.parent = &pdev->dev;
>>> + status = i2c_add_adapter(&i2cd->adapter);
>>> + if (status < 0)
>>> + goto free_irq_vectors;
>>> +
>>> + status = gpu_populate_client(i2cd, pdev->irq);
>>> + if (status < 0) {
>>> + dev_err(&pdev->dev, "gpu_populate_client failed %d\n",
>> status);
>>> + goto del_adapter;
>>> + }
>>> +
>>> + return 0;
>>> +
>>> +del_adapter:
>>> + i2c_del_adapter(&i2cd->adapter);
>>> +free_irq_vectors:
>>> + pci_free_irq_vectors(pdev);
>>> + return status;
>>> +}
>>> +
>>> +static void gpu_i2c_remove(struct pci_dev *pdev) {
>>> + struct gpu_i2c_dev *i2cd = dev_get_drvdata(&pdev->dev);
>>> +
>>> + i2c_del_adapter(&i2cd->adapter);
>>> + pci_free_irq_vectors(pdev);
>>> +}
>>> +
>>> +static int gpu_i2c_resume(struct device *dev) {
>>> + struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev);
>>> +
>>> + gpu_enable_i2c_bus(i2cd);
>>> + return 0;
>>> +}
>>> +
>>> +static int gpu_i2c_idle(struct device *dev) {
>>> + struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev);
>>> +
>>> + if (!mutex_trylock(&i2cd->mutex)) {
>>> + dev_info(dev, "-EBUSY\n");
>>> + return -EBUSY;
>>> + }
>>> + mutex_unlock(&i2cd->mutex);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, NULL, gpu_i2c_resume,
>>> +gpu_i2c_idle);
>>> +
>>> +static struct pci_driver gpu_i2c_driver = {
>>> + .name = "nvidia-gpu",
>>> + .id_table = gpu_i2c_ids,
>>> + .probe = gpu_i2c_probe,
>>> + .remove = gpu_i2c_remove,
>>> + .driver = {
>>> + .pm = &gpu_i2c_driver_pm,
>>> + },
>>> +};
>>> +
>>> +module_pci_driver(gpu_i2c_driver);
>>> +
>>> +MODULE_AUTHOR("Ajay Gupta <ajayg@xxxxxxxxxx>");
>>> +MODULE_DESCRIPTION("Nvidia GPU I2C controller Driver");
>>> +MODULE_LICENSE("GPL v2");
>>>
>
