This driver currently emits a STOP if the next message is not
I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR
ioctl, where read/write transactions are combined without STOP
between.
Issue STOP only when the message is the last one _or_ flagged with
I2C_M_STOP.
Fixes: 6a62974b667f ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver")
Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-uniphier-f.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index 9918bdd..a403e85 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -401,11 +401,8 @@ static int uniphier_fi2c_master_xfer(struct i2c_adapter *adap,
return ret;
for (msg = msgs; msg < emsg; msg++) {
- /* If next message is read, skip the stop condition */
- bool stop = !(msg + 1 < emsg && msg[1].flags & I2C_M_RD);
- /* but, force it if I2C_M_STOP is set */
- if (msg->flags & I2C_M_STOP)
- stop = true;
+ /* Emit STOP if it is the last message or I2C_M_STOP is set. */
+ bool stop = (msg + 1 == emsg) || (msg->flags & I2C_M_STOP);
ret = uniphier_fi2c_master_xfer_one(adap, msg, stop);
if (ret)
--
2.7.4
