[PATCH v4 0/2] i2c: npcm7xx: new driver for I2C controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Nuvoton NPCM7XX I2C Controller
NPCM7xx includes 16 I2C controllers. This driver operates the controller.
This module also includes a slave mode, which will be submitted later on.

---
v4 -> v3:
	- typo on cover letter.

v3 -> v2:
	- fix dt binding: compatible name: omit "bus"

v2 -> v1:
	- run check patch in strict mode.
	- use linux crc.
	- define regs in constant offset without base.
	- remove debug prints.
	- no declarations for local functions.
	
v1: initial version

Signed-off-by: Tali Perry <tali.perry1@xxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

---
Tali Perry (2):
  dt-bindings: i2c: npcm7xx: add binding for i2c controller
  i2c: npcm7xx: add i2c controller master mode only

 .../devicetree/bindings/i2c/i2c-npcm7xx.txt        |   29 +
 drivers/i2c/busses/Kconfig                         |   11 +
 drivers/i2c/busses/Makefile                        |    1 +
 drivers/i2c/busses/i2c-npcm7xx.c                   | 2017 ++++++++++++++++++++
 4 files changed, 2058 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-npcm7xx.txt
 create mode 100644 drivers/i2c/busses/i2c-npcm7xx.c

-- 
2.14.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux