Re: [PATCH v3 2/2] i2c: Add Qualcomm CCI I2C driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17-08-18, 11:33, Bjorn Andersson wrote:
> On Fri 17 Aug 05:41 PDT 2018, Vinod wrote:
> 
> > On 07-08-18, 10:00, Vinod wrote:
> > > On 06-08-18, 11:45, Bjorn Andersson wrote:
> > 
> > > > The dt binding mentions that a power domain is required for v1.4, but
> > > > there's no support for this in the driver.
> > > 
> > > I will check that, yes it is not handled in the driver we have
> > 
> > So I discussed this with Todor and found that __genpd_dev_pm_attach in
> > drivers/base/power/domain.c handles the "power-domain" binding.
> > 
> > I do not think driver needs to do anything here, this seems handled in
> > core and we need to provide binding, FWIW, the 8996 doesn't work without
> > this
> > 
> 
> Right, the power-domain will be picked up and afaict will be turned on
> as it's attached to the device during probe of the platform driver. So
> you don't need to do anything additionally to make it work.
> 
> But I suggest that you follow up with a patch adding runtime pm support
> so that the associated power domain will be disabled when the bus is not
> in use.

Agreed, have already started on that.

-- 
~Vinod



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux