Using i2c_transfer() to set the shutdown bit is more reliable than using
regmap. Furthermore you have to void the default lock configuration in
the regmap configuration, e.g. by setting use_hwlock to true, to used in
atomic/IRQ disabled contexts.
Tested on a phyCORE-i.MX6 Solo board.
Signed-off-by: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx>
---
drivers/mfd/da9062-core.c | 1 +
drivers/watchdog/da9062_wdt.c | 17 +++++++++++++----
include/linux/mfd/da9062/core.h | 1 +
3 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/mfd/da9062-core.c b/drivers/mfd/da9062-core.c
index 9f6105906c09..b6a01054ba0f 100644
--- a/drivers/mfd/da9062-core.c
+++ b/drivers/mfd/da9062-core.c
@@ -609,6 +609,7 @@ static int da9062_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, chip);
chip->dev = &i2c->dev;
+ chip->i2c = i2c;
if (!i2c->irq) {
dev_err(chip->dev, "No IRQ configured\n");
diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c
index fe169d8e1fb2..ad6483d25f83 100644
--- a/drivers/watchdog/da9062_wdt.c
+++ b/drivers/watchdog/da9062_wdt.c
@@ -11,6 +11,7 @@
#include <linux/platform_device.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
+#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/mfd/da9062/registers.h>
@@ -152,12 +153,20 @@ static int da9062_wdt_restart(struct watchdog_device *wdd, unsigned long action,
void *data)
{
struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd);
+ struct i2c_client *client = wdt->hw->i2c;
+ __u8 buf[3] = {DA9062AA_CONTROL_F, DA9062AA_SHUTDOWN_MASK, 0x0};
+ struct i2c_msg msgs[1] = {
+ {
+ .addr = client->addr,
+ .flags = (client->flags & I2C_M_TEN),
+ .len = sizeof(buf),
+ .buf = buf,
+ }
+ };
int ret;
- ret = regmap_write(wdt->hw->regmap,
- DA9062AA_CONTROL_F,
- DA9062AA_SHUTDOWN_MASK);
- if (ret)
+ ret = i2c_transfer(client->adapter, msgs, sizeof(msgs));
+ if (ret < 0)
dev_alert(wdt->hw->dev, "Failed to shutdown (err = %d)\n",
ret);
diff --git a/include/linux/mfd/da9062/core.h b/include/linux/mfd/da9062/core.h
index 74d33a01ddae..c994293b3aef 100644
--- a/include/linux/mfd/da9062/core.h
+++ b/include/linux/mfd/da9062/core.h
@@ -68,6 +68,7 @@ enum da9062_irqs {
struct da9062 {
struct device *dev;
struct regmap *regmap;
+ struct i2c_client *i2c;
struct regmap_irq_chip_data *regmap_irq;
enum da9062_compatible_types chip_type;
};
--
2.16.4
