Hi Ken,
Thanks for the patch!
I would have liked this subject:
i2c: muxes: pca9641: new driver
On 2018-03-19 12:38, Ken Chen wrote:
Initial PCA9641 2 chennel I2C bus master arbiter
channel
with separate implementation. It has probe issue
and difference device hehavior between PCA9541
behavior
and PCA9641 in original PCA9641 patch.
Signed-off-by: Ken Chen <chen.kenyy@xxxxxxxxxxxx>
---
drivers/i2c/muxes/Kconfig | 9 +
drivers/i2c/muxes/Makefile | 1 +
drivers/i2c/muxes/i2c-mux-pca9641.c | 360 ++++++++++++++++++++++++++++++++++++
Given the big similarities between this and the pca9541 driver,
I would very much prefer if you could extend that driver instead
of making an almost-copy like this.
I have added some comments below anyway, but most of them are
irrelevant given that I want this merged with the pca9541 driver.
But maybe Guenter feels differently about that merge?
3 files changed, 370 insertions(+)
create mode 100644 drivers/i2c/muxes/i2c-mux-pca9641.c
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index 52a4a92..f9c51b8 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -73,6 +73,15 @@ config I2C_MUX_PCA954x
This driver can also be built as a module. If so, the module
will be called i2c-mux-pca954x.
+config I2C_MUX_PCA9641
+ tristate "NXP PCA9641 I2C Master demultiplexer"
+ help
+ If you say yes here you get support for the NXP PCA9641
+ I2C Master demultiplexer with an arbiter function.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-mux-pca9641.
+
config I2C_MUX_PINCTRL
tristate "pinctrl-based I2C multiplexer"
depends on PINCTRL
diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
index 6d9d865..a229a1a 100644
--- a/drivers/i2c/muxes/Makefile
+++ b/drivers/i2c/muxes/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_I2C_MUX_LTC4306) += i2c-mux-ltc4306.o
obj-$(CONFIG_I2C_MUX_MLXCPLD) += i2c-mux-mlxcpld.o
obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
+obj-$(CONFIG_I2C_MUX_PCA9641) += i2c-mux-pca9641.o
obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o
obj-$(CONFIG_I2C_MUX_REG) += i2c-mux-reg.o
diff --git a/drivers/i2c/muxes/i2c-mux-pca9641.c b/drivers/i2c/muxes/i2c-mux-pca9641.c
new file mode 100644
index 0000000..bcf45c8
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-mux-pca9641.c
@@ -0,0 +1,360 @@
+/*
+ * I2C demultiplexer driver for PCA9641 bus master demultiplexer
+ *
+ * Copyright (c) 2010 Ericsson AB.
+ *
+ * Author: Ken Chen <chen.kenyy@xxxxxxxxxxxx>
A bit rich to claim to be the sole author, when you clearly "just"
modified the pca9541 driver. Please state the history!
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+
+#include <linux/i2c/pca954x.h>
What is this last include for? We have moved away from specifying platform
data in (new) code.
+
+/*
+ * The PCA9641 is two I2C bus masters demultiplexer. It supports two I2C masters
"is two I2C bus masters" -> "is a two I2C bus master"
+ * connected to a single slave bus.
+ *
+ * It is designed for high reliability dual master I2C bus applications where
+ * correct system operation is required, even when two I2C master issue their
+ * commands at the same time. The arbiter will select a winner and let it work
+ * uninterrupted, and the losing master will take control of the I2C bus after
+ * the winnter has finished. The arbiter also allows for queued requests where
winner
+ * a master requests the downstream bus while the other master has control.
+ *
+ */
+
+#define PCA9641_ID 0x01
+#define PCA9641_ID_MAGIC 0x38
+
+#define PCA9641_CONTROL 0x01
+#define PCA9641_STATUS 0x02
+#define PCA9641_TIME 0x03
+
+#define PCA9641_CTL_LOCK_REQ BIT(0)
+#define PCA9641_CTL_LOCK_GRANT BIT(1)
+#define PCA9641_CTL_BUS_CONNECT BIT(2)
+#define PCA9641_CTL_BUS_INIT BIT(3)
+#define PCA9641_CTL_SMBUS_SWRST BIT(4)
+#define PCA9641_CTL_IDLE_TIMER_DIS BIT(5)
+#define PCA9641_CTL_SMBUS_DIS BIT(6)
+#define PCA9641_CTL_PRIORITY BIT(7)
+
+#define PCA9641_STS_OTHER_LOCK BIT(0)
+#define PCA9641_STS_BUS_INIT_FAIL BIT(1)
+#define PCA9641_STS_BUS_HUNG BIT(2)
+#define PCA9641_STS_MBOX_EMPTY BIT(3)
+#define PCA9641_STS_MBOX_FULL BIT(4)
+#define PCA9641_STS_TEST_INT BIT(5)
+#define PCA9641_STS_SCL_IO BIT(6)
+#define PCA9641_STS_SDA_IO BIT(7)
+
+#define PCA9641_RES_TIME 0x03
+
+#define busoff(x, y) (!((x) & PCA9641_CTL_LOCK_GRANT) && \
+ !((y) & PCA9641_STS_OTHER_LOCK))
+#define other_lock(x) ((x) & PCA9641_STS_OTHER_LOCK)
+#define lock_grant(x) ((x) & PCA9641_CTL_LOCK_GRANT)
+
+/* arbitration timeouts, in jiffies */
+#define ARB_TIMEOUT (HZ / 8) /* 125 ms until forcing bus ownership */
+#define ARB2_TIMEOUT (HZ / 4) /* 250 ms until acquisition failure */
+
+/* arbitration retry delays, in us */
+#define SELECT_DELAY_SHORT 50
+#define SELECT_DELAY_LONG 1000
+
+struct pca9641 {
+ struct i2c_client *client;
+ unsigned long select_timeout;
+ unsigned long arb_timeout;
+};
+
+static const struct i2c_device_id pca9641_id[] = {
+ {"pca9641", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, pca9641_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pca9641_of_match[] = {
+ { .compatible = "nxp,pca9641" },
You need to describe the DT binding in Documentation/devicetree/bindings/i2c
See nxp,pca9541.txt for inspiration.
+ {}
+};
+#endif
+
+/*
+ * Write to chip register. Don't use i2c_transfer()/i2c_smbus_xfer()
+ * as they will try to lock the adapter a second time.
+ */
+static int pca9641_reg_write(struct i2c_client *client, u8 command, u8 val)
+{
+ struct i2c_adapter *adap = client->adapter;
+ int ret;
+
+ if (adap->algo->master_xfer) {
+ struct i2c_msg msg;
+ char buf[2];
+
+ msg.addr = client->addr;
+ msg.flags = 0;
+ msg.len = 2;
+ buf[0] = command;
+ buf[1] = val;
+ msg.buf = buf;
+ ret = __i2c_transfer(adap, &msg, 1);
+ } else {
+ union i2c_smbus_data data;
+
+ data.byte = val;
+ ret = adap->algo->smbus_xfer(adap, client->addr,
+ client->flags,
+ I2C_SMBUS_WRITE,
+ command,
+ I2C_SMBUS_BYTE_DATA, &data);
+ }
+
+ return ret;
+}
+
+/*
+ * Read from chip register. Don't use i2c_transfer()/i2c_smbus_xfer()
+ * as they will try to lock adapter a second time.
+ */
+static int pca9641_reg_read(struct i2c_client *client, u8 command)
+{
+ struct i2c_adapter *adap = client->adapter;
+ int ret;
+ u8 val;
+
+ if (adap->algo->master_xfer) {
+ struct i2c_msg msg[2] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = &command
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = 1,
+ .buf = &val
+ }
+ };
+ ret = __i2c_transfer(adap, msg, 2);
+ if (ret == 2)
+ ret = val;
+ else if (ret >= 0)
+ ret = -EIO;
+ } else {
+ union i2c_smbus_data data;
+
+ ret = adap->algo->smbus_xfer(adap, client->addr,
+ client->flags,
+ I2C_SMBUS_READ,
+ command,
+ I2C_SMBUS_BYTE_DATA, &data);
+ if (!ret)
+ ret = data.byte;
+ }
+ return ret;
+}
+
+/*
+ * Arbitration management functions
+ */
+static void pca9641_release_bus(struct i2c_client *client)
+{
+ pca9641_reg_write(client, PCA9641_CONTROL, 0);
+}
+
+/*
+ * Channel arbitration
+ *
+ * Return values:
+ * <0: error
+ * 0 : bus not acquired
+ * 1 : bus acquired
+ */
+static int pca9641_arbitrate(struct i2c_client *client)
+{
+ struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+ struct pca9641 *data = i2c_mux_priv(muxc);
+ int reg_ctl, reg_sts;
+
+ reg_ctl = pca9641_reg_read(client, PCA9641_CONTROL);
+ if (reg_ctl < 0)
+ return reg_ctl;
+ reg_sts = pca9641_reg_read(client, PCA9641_STATUS);
+
+ if (busoff(reg_ctl, reg_sts)) {
+ /*
+ * Bus is off. Request ownership or turn it on unless
+ * other master requested ownership.
+ */
+ reg_ctl |= PCA9641_CTL_LOCK_REQ;
+ pca9641_reg_write(client, PCA9641_CONTROL, reg_ctl);
+ reg_ctl = pca9641_reg_read(client, PCA9641_CONTROL);
+
+ if (lock_grant(reg_ctl)) {
+ /*
+ * Other master did not request ownership,
+ * or arbitration timeout expired. Take the bus.
+ */
+ reg_ctl |= PCA9641_CTL_BUS_CONNECT \
+ | PCA9641_CTL_LOCK_REQ;
+ pca9641_reg_write(client, PCA9641_CONTROL, reg_ctl);
+ data->select_timeout = SELECT_DELAY_SHORT;
+
+ return 1;
+ } else {
+ /*
+ * Other master requested ownership.
+ * Set extra long timeout to give it time to acquire it.
+ */
+ data->select_timeout = SELECT_DELAY_LONG * 2;
+ }
+ } else if (lock_grant(reg_ctl)) {
+ /*
+ * Bus is on, and we own it. We are done with acquisition.
+ */
+ reg_ctl |= PCA9641_CTL_BUS_CONNECT | PCA9641_CTL_LOCK_REQ;
+ pca9641_reg_write(client, PCA9641_CONTROL, reg_ctl);
+
+ return 1;
+ } else if (other_lock(reg_sts)) {
+ /*
+ * Other master owns the bus.
+ * If arbitration timeout has expired, force ownership.
+ * Otherwise request it.
+ */
+ data->select_timeout = SELECT_DELAY_LONG;
+ reg_ctl |= PCA9641_CTL_LOCK_REQ;
+ pca9641_reg_write(client, PCA9641_CONTROL, reg_ctl);
+ }
+ return 0;
+}
+
+static int pca9641_select_chan(struct i2c_mux_core *muxc, u32 chan)
+{
+ struct pca9641 *data = i2c_mux_priv(muxc);
+ struct i2c_client *client = data->client;
+ int ret;
+ unsigned long timeout = jiffies + ARB2_TIMEOUT;
+ /* give up after this time */
+
+ data->arb_timeout = jiffies + ARB_TIMEOUT;
+ /* force bus ownership after this time */
+
+ do {
+ ret = pca9641_arbitrate(client);
+ if (ret)
+ return ret < 0 ? ret : 0;
+
+ if (data->select_timeout == SELECT_DELAY_SHORT)
+ udelay(data->select_timeout);
+ else
+ msleep(data->select_timeout / 1000);
+ } while (time_is_after_eq_jiffies(timeout));
+
+ return -ETIMEDOUT;
+}
+
+static int pca9641_release_chan(struct i2c_mux_core *muxc, u32 chan)
+{
+ struct pca9641 *data = i2c_mux_priv(muxc);
+ struct i2c_client *client = data->client;
+
+ pca9641_release_bus(client);
+ return 0;
+}
+
+/*
+ * I2C init/probing/exit functions
+ */
+static int pca9641_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adap = client->adapter;
+ struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct i2c_mux_core *muxc;
+ struct pca9641 *data;
+ int force;
+ int ret;
+
+ if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
Reading the data sheet, I noticed that the chip supports I2C device id.
There's a brand new function available in -next [1] that allows you to
check this. See the pca954x driver in -next for an example [2]. It checks
the I2C device id for the newer pca984x chips.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/i2c/i2c-core-base.c
i2c_get_device_id(), currently circa line 2000
[2] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/i2c/muxes/i2c-mux-pca954x.c
+ /*
+ * I2C accesses are unprotected here.
+ * We have to lock the adapter before releasing the bus.
+ */
+ i2c_lock_adapter(adap);
+ pca9641_release_bus(client);
+ i2c_unlock_adapter(adap);
+
+ /* Create mux adapter */
+
+ force = 0;
+ if (pdata)
+ force = pdata->modes[0].adap_id;
+ muxc = i2c_mux_alloc(adap, &client->dev, 8, sizeof(*data),
Why 8? Should be 1, no?
+ I2C_MUX_ARBITRATOR,
+ pca9641_select_chan, pca9641_release_chan);
+ if (!muxc)
+ return -ENOMEM;
+
+ data = i2c_mux_priv(muxc);
+ data->client = client;
+
+ i2c_set_clientdata(client, muxc);
+
+
Lose one of the empty lines here.
+ ret = i2c_mux_add_adapter(muxc, force, 0, 0);
+ if (ret) {
+ dev_err(&client->dev, "failed to register master demultiplexer\n");
This dev_err should go. i2c_mux_add_adapter provides a more
detailed error message on failure.
Cheers,
Peter
+ return ret;
+ }
+
+ dev_info(&client->dev, "registered master demultiplexer for I2C %s\n",
+ client->name);
+
+ return 0;
+}
+
+static int pca9641_remove(struct i2c_client *client)
+{
+ struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+
+ i2c_mux_del_adapters(muxc);
+ return 0;
+}
+
+static struct i2c_driver pca9641_driver = {
+ .driver = {
+ .name = "pca9641",
+ .of_match_table = of_match_ptr(pca9641_of_match),
+ },
+ .probe = pca9641_probe,
+ .remove = pca9641_remove,
+ .id_table = pca9641_id,
+};
+
+module_i2c_driver(pca9641_driver);
+
+MODULE_AUTHOR("Ken Chen <chen.kenyy@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("PCA9641 I2C master demultiplexer driver");
+MODULE_LICENSE("GPL v2");
