The blackfin architecture is getting removed, so the twi driver can also be removed. Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> --- drivers/i2c/busses/Kconfig | 18 - drivers/i2c/busses/Makefile | 1 - drivers/i2c/busses/i2c-bfin-twi.c | 737 -------------------------------------- 3 files changed, 756 deletions(-) delete mode 100644 drivers/i2c/busses/i2c-bfin-twi.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 68ceac7617ff..4c0895165727 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -445,24 +445,6 @@ config I2C_BRCMSTB If you do not need I2C interface, say N. -config I2C_BLACKFIN_TWI - tristate "Blackfin TWI I2C support" - depends on BLACKFIN - depends on !BF561 && !BF531 && !BF532 && !BF533 - help - This is the I2C bus driver for Blackfin on-chip TWI interface. - - This driver can also be built as a module. If so, the module - will be called i2c-bfin-twi. - -config I2C_BLACKFIN_TWI_CLK_KHZ - int "Blackfin TWI I2C clock (kHz)" - depends on I2C_BLACKFIN_TWI - range 21 400 - default 50 - help - The unit of the TWI clock is kHz. - config I2C_CADENCE tristate "Cadence I2C Controller" depends on ARCH_ZYNQ || ARM64 || XTENSA diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 2ce8576540a2..9e475a54e36e 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -38,7 +38,6 @@ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o obj-$(CONFIG_I2C_BCM_IPROC) += i2c-bcm-iproc.o -obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o obj-$(CONFIG_I2C_CPM) += i2c-cpm.o diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c deleted file mode 100644 index ff3343186a82..000000000000 -- 2.9.0
