On 2 March 2018 at 08:31, Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx> wrote: > Add a binding and a driver for the I2C IP found in the Socionext SynQuacer > SoC, which is essentially a rebranded version of the Fujitsu F_I2C controller. > > I think this is good to go now. Wolfram? > Ping? > v5: > - add Rob's ack to #1 > - drop unnecessary 'platform_set_drvdata(pdev, NULL)' in remove path (#2) > > v4: > - clarify binding that only a single interrupt specifier is expected (#1) > - check return value of clk_prepare_enable() on probe path (#2) > - add Andy's R-b to patch #2 > > v3: > - incorporate more of Andy's review comments (#2), especially regarding the > bus speed and clock source handling for ACPI > - patch #1 unchanged. > > v2: > - incorporate Andy's review comments (#2) > - patch #1 unchanged. > > Ard Biesheuvel (2): > dt-bindings: i2c: add binding for Socionext SynQuacer I2C > i2c: add support for Socionext SynQuacer I2C controller > > Documentation/devicetree/bindings/i2c/i2c-synquacer.txt | 29 + > drivers/i2c/busses/Kconfig | 10 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-synquacer.c | 791 ++++++++++++++++++++ > 4 files changed, 831 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt > create mode 100644 drivers/i2c/busses/i2c-synquacer.c > > -- > 2.11.0 >
