This is unsafe, as the runtime PM callbacks are called from the PM
workqueue, so this may deadlock when handling an i2c attached clock,
which may already hold the clk_prepare mutex from another context.
Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-imx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index c9632b2f0eaa..d7267dd9c7bf 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1226,7 +1226,7 @@ static int i2c_imx_runtime_suspend(struct device *dev)
{
struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
- clk_disable_unprepare(i2c_imx->clk);
+ clk_disable(i2c_imx->clk);
return 0;
}
@@ -1236,7 +1236,7 @@ static int i2c_imx_runtime_resume(struct device *dev)
struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
int ret;
- ret = clk_prepare_enable(i2c_imx->clk);
+ ret = clk_enable(i2c_imx->clk);
if (ret)
dev_err(dev, "can't enable I2C clock, ret=%d\n", ret);
--
2.16.1
