Interrupt number 0 (returned by platform_get_irq()) might be a valid IRQ
so do not treat it as an error. If interrupt 0 was configured, the driver
would exit the probe early, before finishing initialization, but with
0-exit status.
Reported-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Fixes: e0d1ec97853f ("i2c-s3c2410: Change IRQ to be plain integer.")
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-s3c2410.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 5d97510ee48b..783a93404f47 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1178,7 +1178,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
*/
if (!(i2c->quirks & QUIRK_POLL)) {
i2c->irq = ret = platform_get_irq(pdev, 0);
- if (ret <= 0) {
+ if (ret < 0) {
dev_err(&pdev->dev, "cannot find IRQ\n");
clk_unprepare(i2c->clk);
return ret;
--
2.7.4
