On Tue, Sep 05, 2017 at 05:32:07PM +0200, Rafael J. Wysocki wrote:
> On Tue, Sep 5, 2017 at 5:24 PM, Mika Westerberg
> <mika.westerberg@xxxxxxxxxxxxxxx> wrote:
> > On Tue, Sep 05, 2017 at 05:04:21PM +0200, Rafael J. Wysocki wrote:
> >> On Tuesday, September 5, 2017 5:07:44 PM CEST Mika Westerberg wrote:
> >> > On Tue, Sep 05, 2017 at 04:55:44PM +0200, Rafael J. Wysocki wrote:
> >> > > On Tuesday, September 5, 2017 4:58:35 PM CEST Mika Westerberg wrote:
> >> > > > On Tue, Sep 05, 2017 at 04:46:11PM +0200, Rafael J. Wysocki wrote:
> >> > > > > On Tuesday, September 5, 2017 4:45:11 PM CEST Mika Westerberg wrote:
> >> > > > > > On Mon, Sep 04, 2017 at 12:01:54PM +0200, Rafael J. Wysocki wrote:
> >> > > > > > > static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
> >> > > > > > > - .prepare = dw_i2c_plat_prepare,
> >> > > > > > > - .complete = dw_i2c_plat_complete,
> >> > > > > > > - SET_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
> >> > > > > > > - SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend,
> >> > > > > > > - dw_i2c_plat_resume,
> >> > > > > > > - NULL)
> >> > > > > > > + SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
> >> > > > > >
> >> > > > > > This seems to cause problem with intel-lpss MFD driver because it uses
> >> > > > > > .suspend() and .resume() instead of .suspend_late() and .resume_early().
> >> > > > >
> >> > > > > OK, so there is one more dependency here.
> >> > > > >
> >> > > > > Can you please point me to this code?
> >> > > >
> >> > > > It is in drivers/mfd/intel-lpss.c. See intel_lpss_resume().
> >> > > >
> >> > >
> >> > > Looking at it, but I don't quite see how this is related to the
> >> > > i2c-designware-platedv suspend/resume ...
> >> >
> >> > intel-lpss is the parent device for i2c-designware-platdrv. It is
> >> > supposed to handle all LPSS specific stuff, like bringing the PCI device
> >> > out of reset before the i2c-designware-platdrv does its own resume
> >> > things.
> >>
> >> Yes, I see.
> >>
> >> OK, so what about moving its suspend/resume to the late/early stages?
> >>
> >> Would the parent of it be confused?
> >
> > It seems to work. I did following change and now suspend/resume works
> > fine with your patch series.
>
> OK, thanks!
>
> > diff --git a/drivers/mfd/intel-lpss.h b/drivers/mfd/intel-lpss.h
> > index 694116630ffa..c987f7fe6c74 100644
> > --- a/drivers/mfd/intel-lpss.h
> > +++ b/drivers/mfd/intel-lpss.h
> > @@ -38,8 +38,8 @@ int intel_lpss_resume(struct device *dev);
> > #ifdef CONFIG_PM_SLEEP
> > #define INTEL_LPSS_SLEEP_PM_OPS \
> > .prepare = intel_lpss_prepare, \
> > - .suspend = intel_lpss_suspend, \
> > - .resume = intel_lpss_resume, \
> > + .suspend_late = intel_lpss_suspend, \
> > + .resume_early = intel_lpss_resume, \
> > .freeze = intel_lpss_suspend, \
> > .thaw = intel_lpss_resume, \
> > .poweroff = intel_lpss_suspend, \
>
> Of course, freeze/thaw, poweroff/restore need to be moved to the
> late/early stages too.
Right.
> I'll add this patch to the series and resend, then.
Thanks!
> BTW, is the parent of intel-lpss in this case a PCI device or
> something else?
It is the PCI host bridge:
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
The following are the two LPSS I2C devices where intel-lpss binds to:
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #0 (rev 31)
00:15.1 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #1 (rev 31)
