On Thu, Aug 24, 2017 at 11:21:12AM +0200, Geert Uytterhoeven wrote: > The current i2c-gpio DT bindings use a single unnamed "gpios" property > to refer to the SDA and SCL signal lines by index. This is error-prone > for the casual DT writer and reviewer, as one has to look up the order > in the DT bindings. > > Fix this by amending the DT bindings to use two separate named gpios > properties, and deprecate the old unnamed variant. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> > --- > Documentation/devicetree/bindings/i2c/i2c-gpio.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt > index 4f8ec947c6bd9cad..61033f73577dd70e 100644 > --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt > +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt > @@ -2,8 +2,9 @@ Device-Tree bindings for i2c gpio driver > > Required properties: > - compatible = "i2c-gpio"; > - - gpios: sda and scl gpio > - > + - sda-gpios: gpio used for the sda signal > + - scl-gpios: gpio used for the scl signal > + - gpios: sda and scl gpio, alternative for {sda,scl}-gpios (deprecated) > > Optional properties: > - i2c-gpio,sda-open-drain: sda as open drain Maybe it would be best to update the example too?