Add I2C support to 66AK2G. Primary requirement is to add PM
Runtime support to the driver.
This has been tested on following platforms by performing simple i2c test
such as i2c detect and reading on board i2c devices:
K2G GP evm
OMAPL138
K2L GP EVM
and boot tested on:
K2E GP EVM
K2HK GP EVM
Franklin S Cooper Jr (3):
i2c: davinci: Preserve return value of devm_clk_get
i2c: davinci: Add PM Runtime Support
dt-bindings: i2c: i2c-davinci: Update binding for 66AK2Gx pwr dm
property
Vitaly Andrianov (1):
ARM: dts: keystone-k2g: Add I2C nodes
.../devicetree/bindings/i2c/i2c-davinci.txt | 12 +++++
arch/arm/boot/dts/keystone-k2g.dtsi | 36 +++++++++++++
drivers/i2c/busses/i2c-davinci.c | 63 ++++++++++++++++++----
3 files changed, 102 insertions(+), 9 deletions(-)
--
2.9.4.dirty
