Re: [PATCH v10 05/10] i2c: mux: pca954x: Call request irq after adding mux segments

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



G'day Peter,

Thanks for the review.

On 31/07/2017 16:09, Peter Rosin wrote:
Hi Phil,

Nice to get rid of the mask/unmask! One small nit though, the
'fail_del_adapters' label no longer describes what's going on.
Please change it to 'fail_cleanup' or something like that.
will do, I'll wait a little bit longer to see if there's any other comments
on the series.


With that,
Acked-by: Peter Rosin <peda@xxxxxxxxxx>

And also, for the future, please use subjects according to
submitting-patches, i.e., in this case

i2c: mux: pca954x: call request irq after adding mux segments

(lower-case 'c' in call)

ok


Cheers,
Peter

On 2017-07-25 05:40, Phil Reid wrote:
The pca954x device do not have the ability to mask interrupts. For
i2c slave devices that also don't have masking ability (eg ltc1760
smbalert output) delay registering the irq until after the mux
segments have been configured. During the mux add_adaptor call the
core i2c system can register an smbalert handler which would then
be called immediately when the irq is registered. This smbalert
handler will then clear the pending irq.

This removes the need for the irq_mask / irq_unmask calls that were
original used to do this.

Signed-off-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
---
  drivers/i2c/muxes/i2c-mux-pca954x.c | 85 +++++++++++--------------------------
  1 file changed, 25 insertions(+), 60 deletions(-)

diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index f1751c2..ac0f083 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -246,36 +246,6 @@ static irqreturn_t pca954x_irq_handler(int irq, void *dev_id)
  	return handled ? IRQ_HANDLED : IRQ_NONE;
  }
-static void pca954x_irq_mask(struct irq_data *idata)
-{
-	struct pca954x *data = irq_data_get_irq_chip_data(idata);
-	unsigned int pos = idata->hwirq;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&data->lock, flags);
-
-	data->irq_mask &= ~BIT(pos);
-	if (!data->irq_mask)
-		disable_irq(data->client->irq);
-
-	raw_spin_unlock_irqrestore(&data->lock, flags);
-}
-
-static void pca954x_irq_unmask(struct irq_data *idata)
-{
-	struct pca954x *data = irq_data_get_irq_chip_data(idata);
-	unsigned int pos = idata->hwirq;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&data->lock, flags);
-
-	if (!data->irq_mask)
-		enable_irq(data->client->irq);
-	data->irq_mask |= BIT(pos);
-
-	raw_spin_unlock_irqrestore(&data->lock, flags);
-}
-
  static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type)
  {
  	if ((type & IRQ_TYPE_SENSE_MASK) != IRQ_TYPE_LEVEL_LOW)
@@ -285,8 +255,6 @@ static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type)
static struct irq_chip pca954x_irq_chip = {
  	.name = "i2c-mux-pca954x",
-	.irq_mask = pca954x_irq_mask,
-	.irq_unmask = pca954x_irq_unmask,
  	.irq_set_type = pca954x_irq_set_type,
  };
@@ -294,7 +262,7 @@ static int pca954x_irq_setup(struct i2c_mux_core *muxc)
  {
  	struct pca954x *data = i2c_mux_priv(muxc);
  	struct i2c_client *client = data->client;
-	int c, err, irq;
+	int c, irq;
if (!data->chip->has_irq || client->irq <= 0)
  		return 0;
@@ -314,24 +282,22 @@ static int pca954x_irq_setup(struct i2c_mux_core *muxc)
  			handle_simple_irq);
  	}
- err = devm_request_threaded_irq(&client->dev, data->client->irq, NULL,
-					pca954x_irq_handler,
-					IRQF_ONESHOT | IRQF_SHARED,
-					"pca954x", data);
-	if (err)
-		goto err_req_irq;
+	return 0;
+}
- disable_irq(data->client->irq);
+static void pca954x_cleanup(struct i2c_mux_core *muxc)
+{
+	struct pca954x *data = i2c_mux_priv(muxc);
+	int c, irq;
- return 0;
-err_req_irq:
-	for (c = 0; c < data->chip->nchans; c++) {
-		irq = irq_find_mapping(data->irq, c);
-		irq_dispose_mapping(irq);
+	if (data->irq) {
+		for (c = 0; c < data->chip->nchans; c++) {
+			irq = irq_find_mapping(data->irq, c);
+			irq_dispose_mapping(irq);
+		}
+		irq_domain_remove(data->irq);
  	}
-	irq_domain_remove(data->irq);
-
-	return err;
+	i2c_mux_del_adapters(muxc);
  }
/*
@@ -417,6 +383,15 @@ static int pca954x_probe(struct i2c_client *client,
  			goto fail_del_adapters;
  	}
+ if (data->irq) {
+		ret = devm_request_threaded_irq(&client->dev, data->client->irq,
+						NULL, pca954x_irq_handler,
+						IRQF_ONESHOT | IRQF_SHARED,
+						"pca954x", data);
+		if (ret)
+			goto fail_del_adapters;
+	}
+
  	dev_info(&client->dev,
  		 "registered %d multiplexed busses for I2C %s %s\n",
  		 num, data->chip->muxtype == pca954x_ismux
@@ -425,25 +400,15 @@ static int pca954x_probe(struct i2c_client *client,
  	return 0;
fail_del_adapters:
-	i2c_mux_del_adapters(muxc);
+	pca954x_cleanup(muxc);
  	return ret;
  }
static int pca954x_remove(struct i2c_client *client)
  {
  	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
-	struct pca954x *data = i2c_mux_priv(muxc);
-	int c, irq;
- if (data->irq) {
-		for (c = 0; c < data->chip->nchans; c++) {
-			irq = irq_find_mapping(data->irq, c);
-			irq_dispose_mapping(irq);
-		}
-		irq_domain_remove(data->irq);
-	}
-
-	i2c_mux_del_adapters(muxc);
+	pca954x_cleanup(muxc);
  	return 0;
  }





--
Regards
Phil Reid

ElectroMagnetic Imaging Technology Pty Ltd
Development of Geophysical Instrumentation & Software
www.electromag.com.au

3 The Avenue, Midland WA 6056, AUSTRALIA
Ph: +61 8 9250 8100
Fax: +61 8 9250 7100
Email: preid@xxxxxxxxxxxxxxxxx



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux