Hi Ulrich,
Thank you for the patch.
On Monday 17 Jul 2017 17:24:36 Ulrich Hecht wrote:
> Adds serial port SCIF1 and the MAX9260 deserializers connected to it.
>
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
> ---
> arch/arm/boot/dts/r8a7792-blanche.dts | 52 +++++++++++++++++++++++++++++++
You're probably aware of this already, but you need to document the DT
bindings :-)
> 1 file changed, 52 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts
> b/arch/arm/boot/dts/r8a7792-blanche.dts index 9b67dca..2ae9a87 100644
> --- a/arch/arm/boot/dts/r8a7792-blanche.dts
> +++ b/arch/arm/boot/dts/r8a7792-blanche.dts
> @@ -21,6 +21,7 @@
> aliases {
> serial0 = &scif0;
> serial1 = &scif3;
> + serial2 = &scif1;
> };
>
> chosen {
> @@ -186,6 +187,16 @@
> gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
> enable-active-high;
> };
> +
> + mux: mux-controller {
> + compatible = "gpio-mux";
> + #mux-control-cells = <0>;
> +
> + mux-gpios = <&gpio5 12 GPIO_ACTIVE_HIGH>,
> + <&gpio5 13 GPIO_ACTIVE_HIGH>,
> + <&gpio5 14 GPIO_ACTIVE_HIGH>,
> + <&gpio5 15 GPIO_ACTIVE_HIGH>;
> + };
> };
>
> &extal_clk {
> @@ -202,6 +213,11 @@
> function = "scif0";
> };
>
> + scif1_pins: scif1 {
> + groups = "scif1_data";
> + function = "scif1";
> + };
> +
> scif3_pins: scif3 {
> groups = "scif3_data";
> function = "scif3";
> @@ -246,6 +262,42 @@
> status = "okay";
> };
>
> +&scif1 {
> + pinctrl-0 = <&scif1_pins>;
> + pinctrl-names = "default";
> +
> + status = "okay";
> +
> + mux-controls = <&mux>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + gmsl-deserializer@0 {
> + compatible = "maxim,max9260";
> + reg = <0x8>;
> + };
> + gmsl-deserializer@1 {
> + compatible = "maxim,max9260";
> + reg = <0x9>;
> + };
> + gmsl-deserializer@2 {
> + compatible = "maxim,max9260";
> + reg = <0xa>;
> + };
> + gmsl-deserializer@3 {
> + compatible = "maxim,max9260";
> + reg = <0xb>;
> + };
> + gmsl-deserializer@4 {
> + compatible = "maxim,max9260";
> + reg = <0x4>;
> + };
> + gmsl-deserializer@5 {
> + compatible = "maxim,max9260";
> + reg = <0x5>;
> + };
> +};
> +
> &scif3 {
> pinctrl-0 = <&scif3_pins>;
> pinctrl-names = "default";
--
Regards,
Laurent Pinchart
