From: "Edward A. James" <eajames@xxxxxxxxxx> This series adds an algorithm for an I2C master physically located on an FSI slave device. The I2C master has multiple ports, each of which may be connected to an I2C slave. Access to the I2C master registers is achieved over FSI bus. Due to the multi-port nature of the I2C master, the driver instantiates a new I2C adapter for each port connected to a slave. The connected ports should be defined in the device tree under the I2C master device. Edward A. James (6): drivers/i2c: Add FSI-attached I2C master algorithm drivers/i2c: Add port structure to FSI algorithm drivers/i2c: Add transfer implementation for FSI algorithm drivers/i2c: Add I2C master locking to FSI algorithm drivers/i2c: Add bus recovery for FSI algorithm Documentation/devicetree: Add FSI-attached I2C master dt bindings Documentation/devicetree/bindings/i2c/i2c-fsi.txt | 31 + drivers/i2c/busses/Kconfig | 11 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-fsi.c | 656 ++++++++++++++++++++++ 4 files changed, 699 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt create mode 100644 drivers/i2c/busses/i2c-fsi.c -- 1.8.3.1
