This patch uses a more generic definition of speed enum for i2c-stm32f4
driver.
Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@xxxxxxxxx>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
Reviewed-by: Ludovic BARRE <ludovic.barre@xxxxxx>
---
drivers/i2c/busses/i2c-stm32.h | 20 ++++++++++++++++++++
drivers/i2c/busses/i2c-stm32f4.c | 18 +++++++-----------
2 files changed, 27 insertions(+), 11 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-stm32.h
diff --git a/drivers/i2c/busses/i2c-stm32.h b/drivers/i2c/busses/i2c-stm32.h
new file mode 100644
index 0000000..dab5176
--- /dev/null
+++ b/drivers/i2c/busses/i2c-stm32.h
@@ -0,0 +1,20 @@
+/*
+ * i2c-stm32.h
+ *
+ * Copyright (C) M'boumba Cedric Madianga 2017
+ * Author: M'boumba Cedric Madianga <cedric.madianga@xxxxxxxxx>
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _I2C_STM32_H
+#define _I2C_STM32_H
+
+enum stm32_i2c_speed {
+ STM32_I2C_SPEED_STANDARD, /* 100 kHz */
+ STM32_I2C_SPEED_FAST, /* 400 kHz */
+ STM32_I2C_SPEED_FAST_PLUS, /* 1 MHz */
+ STM32_I2C_SPEED_END,
+};
+
+#endif /* _I2C_STM32_H */
diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
index f9dd7e8..b81557d 100644
--- a/drivers/i2c/busses/i2c-stm32f4.c
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -27,6 +27,8 @@
#include <linux/platform_device.h>
#include <linux/reset.h>
+#include "i2c-stm32.h"
+
/* STM32F4 I2C offset registers */
#define STM32F4_I2C_CR1 0x00
#define STM32F4_I2C_CR2 0x04
@@ -90,12 +92,6 @@
#define STM32F4_I2C_MAX_FREQ 46U
#define HZ_TO_MHZ 1000000
-enum stm32f4_i2c_speed {
- STM32F4_I2C_SPEED_STANDARD, /* 100 kHz */
- STM32F4_I2C_SPEED_FAST, /* 400 kHz */
- STM32F4_I2C_SPEED_END,
-};
-
/**
* struct stm32f4_i2c_msg - client specific data
* @addr: 8-bit slave addr, including r/w bit
@@ -159,7 +155,7 @@ static int stm32f4_i2c_set_periph_clk_freq(struct stm32f4_i2c_dev *i2c_dev)
i2c_dev->parent_rate = clk_get_rate(i2c_dev->clk);
freq = DIV_ROUND_UP(i2c_dev->parent_rate, HZ_TO_MHZ);
- if (i2c_dev->speed == STM32F4_I2C_SPEED_STANDARD) {
+ if (i2c_dev->speed == STM32_I2C_SPEED_STANDARD) {
/*
* To reach 100 kHz, the parent clk frequency should be between
* a minimum value of 2 MHz and a maximum value of 46 MHz due
@@ -216,7 +212,7 @@ static void stm32f4_i2c_set_rise_time(struct stm32f4_i2c_dev *i2c_dev)
* is not higher than 46 MHz . As a result trise is at most 4 bits wide
* and so fits into the TRISE bits [5:0].
*/
- if (i2c_dev->speed == STM32F4_I2C_SPEED_STANDARD)
+ if (i2c_dev->speed == STM32_I2C_SPEED_STANDARD)
trise = freq + 1;
else
trise = freq * 3 / 10 + 1;
@@ -230,7 +226,7 @@ static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev)
u32 val;
u32 ccr = 0;
- if (i2c_dev->speed == STM32F4_I2C_SPEED_STANDARD) {
+ if (i2c_dev->speed == STM32_I2C_SPEED_STANDARD) {
/*
* In standard mode:
* t_scl_high = t_scl_low = CCR * I2C parent clk period
@@ -808,10 +804,10 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
udelay(2);
reset_control_deassert(rst);
- i2c_dev->speed = STM32F4_I2C_SPEED_STANDARD;
+ i2c_dev->speed = STM32_I2C_SPEED_STANDARD;
ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
if (!ret && clk_rate >= 400000)
- i2c_dev->speed = STM32F4_I2C_SPEED_FAST;
+ i2c_dev->speed = STM32_I2C_SPEED_FAST;
i2c_dev->dev = &pdev->dev;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
