Re: [RFC 4/4] ARM: dts: blanche: add SCIF1 and MAX9260 deserializer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 14, 2017 at 9:38 AM, Ulrich Hecht
<ulrich.hecht+renesas@xxxxxxxxx> wrote:
> Adds serial port SCIF1 and the MAX9260 deserializers connected to it.
>
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/r8a7792-blanche.dts | 45 +++++++++++++++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
> index 9b67dca..281484d 100644
> --- a/arch/arm/boot/dts/r8a7792-blanche.dts
> +++ b/arch/arm/boot/dts/r8a7792-blanche.dts
> @@ -21,6 +21,7 @@
>         aliases {
>                 serial0 = &scif0;
>                 serial1 = &scif3;
> +               serial2 = &scif1;
>         };
>
>         chosen {
> @@ -202,6 +203,11 @@
>                 function = "scif0";
>         };
>
> +       scif1_pins: scif1 {
> +               groups = "scif1_data";
> +               function = "scif1";
> +       };
> +
>         scif3_pins: scif3 {
>                 groups = "scif3_data";
>                 function = "scif3";
> @@ -246,6 +252,45 @@
>         status = "okay";
>  };
>
> +&scif1 {
> +       pinctrl-0 = <&scif1_pins>;
> +       pinctrl-names = "default";
> +
> +       status = "okay";
> +
> +       mux-select-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
> +                          <&gpio5 13 GPIO_ACTIVE_LOW>,
> +                          <&gpio5 14 GPIO_ACTIVE_LOW>,
> +                          <&gpio5 15 GPIO_ACTIVE_LOW>;
> +
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +       gmsl-deserializer@0 {
> +               compatible = "maxim,max9260";
> +               reg = <0x8>;

You need to document how muxed serdev devices are represented in
general. As Peter mentioned, you should use the mux-ctrl binding.
Maybe this should have a mux node here too. That helps if we ever have
other child nodes on the UART.

The unit address and reg property values should match.

> +       };
> +       gmsl-deserializer@1 {
> +               compatible = "maxim,max9260";
> +               reg = <0x9>;
> +       };
> +       gmsl-deserializer@2 {
> +               compatible = "maxim,max9260";
> +               reg = <0xa>;
> +       };
> +       gmsl-deserializer@3 {
> +               compatible = "maxim,max9260";
> +               reg = <0xb>;
> +       };
> +       gmsl-deserializer@4 {
> +               compatible = "maxim,max9260";
> +               reg = <0x4>;
> +       };
> +       gmsl-deserializer@5 {
> +               compatible = "maxim,max9260";
> +               reg = <0x5>;
> +       };
> +};
> +
>  &scif3 {
>         pinctrl-0 = <&scif3_pins>;
>         pinctrl-names = "default";
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux