Re: [PATCH 2/3] Documentation: dt: i2c: Add Altera I2C Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

On 04/13/2017 04:22 PM, Rob Herring wrote:
On Tue, Apr 11, 2017 at 11:02:26AM -0500, thor.thayer@xxxxxxxxxxxxxxx wrote:
From: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>

Add the documentation to support the Altera I2C Controller.

"dt-bindings: i2c: ..." for the subject.

Got it. Thanks.


Signed-off-by: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/i2c/i2c-altera.txt         | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-altera.txt

diff --git a/Documentation/devicetree/bindings/i2c/i2c-altera.txt b/Documentation/devicetree/bindings/i2c/i2c-altera.txt
new file mode 100644
index 0000000..a67241c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-altera.txt
@@ -0,0 +1,37 @@
+* Altera I2C Controller

This is the only one? For synthesizable logic or a hard block in
socfpga?

This is synthesizable logic in an FPGA.

+
+Required properties :
+ - compatible : should be "altr,sip-i2c"

Seems kind of generic.

I'm using sip for soft IP - right now we only offer 1 flavor.

+ - reg        : Offset and length of the register set for the device
+ - interrupts : <IRQ> where IRQ is the interrupt number.
+ - clocks     : phandles to input clocks.

Need to specify how many clocks.

OK. There is only 1 so I'll change to singular. phandle to input clock.

+ - #address-cells = <1>;
+ - #size-cells = <0>;
+
+Recommended properties :
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+
+Optional properties :
+ - altr,fifo-size : Size of the RX and TX FIFOs.

in bytes?

Just "fifo-size" is already fairly common, so drop the vendor prefix.

Yes, it is in bytes. I'll make the change.

Thanks for reviewing!

+ - Child nodes conforming to i2c bus binding
+
+Example :
+
+	i2c@100080000 {
+		compatible = "altr,sip-i2c";
+		reg = <0x00000001 0x00080000 0x00000040>;
+		interrupt-parent = <&intc>;
+		interrupts = <0 43 4>;
+		clocks = <&clk_0>;
+		clock-frequency = <100000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		altr,fifo-size = <4>;
+
+		eeprom@51 {
+			compatible = "atmel,24c32";
+			reg = <0x51>;
+			pagesize = <32>;
+		};
+	};
+
--
1.9.1


--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux