Re: [PATCH 1/3] usb: pci-quirks: Add a header for SB800 I/O ports and mutex for locking

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2017-04-01 15:59 keltezéssel, Greg KH írta:
On Sat, Apr 01, 2017 at 01:02:21PM +0200, Zoltan Boszormenyi wrote:
From: Böszörményi Zoltán <zboszor@xxxxx>

This patch adds:
* a mutex in the USB PCI quirks code for synchronizing access to
  the I/O ports on SB800
* a new header that contains symbols for the index and data I/O ports
  and wrappers for locking and unlocking the mutex.
* locking around the I/O port access for SB800

Signed-off-by: Zoltan Boszormenyi <zboszor@xxxxx>
---
 drivers/usb/host/pci-quirks.c | 14 ++++++++++----
 include/linux/sb800.h         | 15 +++++++++++++++
 2 files changed, 25 insertions(+), 4 deletions(-)
 create mode 100644 include/linux/sb800.h

diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index a9a1e4c..9b0445c 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -15,6 +15,7 @@
 #include <linux/export.h>
 #include <linux/acpi.h>
 #include <linux/dmi.h>
+#include <linux/sb800.h>
 #include "pci-quirks.h"
 #include "xhci-ext-caps.h"

@@ -279,6 +280,9 @@ bool usb_amd_prefetch_quirk(void)
 }
 EXPORT_SYMBOL_GPL(usb_amd_prefetch_quirk);

+DEFINE_MUTEX(sb800_mutex);
+EXPORT_SYMBOL_GPL(sb800_mutex);
+
 /*
  * The hardware normally enables the A-link power management feature, which
  * lets the system lower the power consumption in idle states.
@@ -314,11 +318,13 @@ static void usb_amd_quirk_pll(int disable)
 	if (amd_chipset.sb_type.gen == AMD_CHIPSET_SB800 ||
 			amd_chipset.sb_type.gen == AMD_CHIPSET_HUDSON2 ||
 			amd_chipset.sb_type.gen == AMD_CHIPSET_BOLTON) {
-		outb_p(AB_REG_BAR_LOW, 0xcd6);
-		addr_low = inb_p(0xcd7);
-		outb_p(AB_REG_BAR_HIGH, 0xcd6);
-		addr_high = inb_p(0xcd7);
+		enter_sb800();
+		outb_p(AB_REG_BAR_LOW, SB800_PIIX4_SMB_IDX);
+		addr_low = inb_p(SB800_PIIX4_SMB_DATA);
+		outb_p(AB_REG_BAR_HIGH, SB800_PIIX4_SMB_IDX);
+		addr_high = inb_p(SB800_PIIX4_SMB_DATA);
 		addr = addr_high << 8 | addr_low;
+		leave_sb800();

 		outl_p(0x30, AB_INDX(addr));
 		outl_p(0x40, AB_DATA(addr));
diff --git a/include/linux/sb800.h b/include/linux/sb800.h
new file mode 100644
index 0000000..5650b7d
--- /dev/null
+++ b/include/linux/sb800.h
@@ -0,0 +1,15 @@
+
+#ifndef SB800_H
+#define SB800_H
+
+#include <linux/mutex.h>
+
+#define SB800_PIIX4_SMB_IDX		0xcd6
+#define SB800_PIIX4_SMB_DATA	0xcd7
+
+extern struct mutex sb800_mutex;
+
+#define enter_sb800()	mutex_lock(&sb800_mutex)
+#define leave_sb800()	mutex_unlock(&sb800_mutex)

Don't hide the mutex, just spell it out in the code itself.  No need for
these defines at all.

Thanks, I will change it.


thanks,

greg k-h


--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux