Am Mittwoch, 22. März 2017, 18:23:56 CET schrieb Elaine Zhang:
> On 03/21/2017 04:55 PM, Heiko Stübner wrote:
> > Am Donnerstag, 16. März 2017, 21:17:22 CET schrieb cl@xxxxxxxxxxxxxx:
> >> + cru: clock-controller@ff440000 {
> >> + compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
> >> + reg = <0x0 0xff440000 0x0 0x1000>;
> >> + rockchip,grf = <&grf>;
> >> + #clock-cells = <1>;
> >> + #reset-cells = <1>;
> >> + assigned-clocks =
> >> + <&cru DCLK_LCDC>, <&cru SCLK_PDM>,
> >> + <&cru SCLK_RTC32K>, <&cru SCLK_UART0>,
> >> + <&cru SCLK_UART1>, <&cru SCLK_UART2>,
> >> + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
> >> + <&cru ACLK_VIO_PRE>, <&cru ACLK_RGA_PRE>,
> >> + <&cru ACLK_VOP_PRE>, <&cru ACLK_RKVDEC_PRE>,
> >> + <&cru ACLK_RKVENC>, <&cru ACLK_VPU_PRE>,
> >> + <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>,
> >> + <&cru SCLK_VENC_CORE>, <&cru SCLK_VENC_DSP>,
> >> + <&cru SCLK_SDIO>, <&cru SCLK_TSP>,
> >> + <&cru SCLK_WIFI>, <&cru ARMCLK>,
> >> + <&cru PLL_GPLL>, <&cru PLL_CPLL>,
> >> + <&cru ACLK_BUS_PRE>, <&cru HCLK_BUS_PRE>,
> >> + <&cru PCLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
> >> + <&cru HCLK_PERI>, <&cru PCLK_PERI>,
> >> + <&cru ACLK_VIO_PRE>, <&cru HCLK_VIO_PRE>,
> >> + <&cru ACLK_RGA_PRE>, <&cru SCLK_RGA>,
> >> + <&cru ACLK_VOP_PRE>, <&cru ACLK_RKVDEC_PRE>,
> >> + <&cru ACLK_RKVENC>, <&cru ACLK_VPU_PRE>,
> >> + <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>,
> >> + <&cru SCLK_VENC_CORE>, <&cru SCLK_VENC_DSP>,
> >> + <&cru SCLK_EFUSE>, <&cru PCLK_DDR>,
> >> + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>,
> >> + <&cru SCLK_RTC32K>, <&cru SCLK_USB3OTG_SUSPEND>;
> >
> > that list is way to long.
> > Device-specific clocks should be inited in their respective device nodes.
>
> Cpll init freq is 1200M, is too high. we need set cpll child clk div
> first,and then set cpll freq.
> After pll init, others clk init freq can inited in their device node.
thanks, that is a nice explanation. Please put it into a comment above the
assigned-clocks property, so that we can keep that knowledge around for later
times :-) .
Thanks
Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
