On 2016-11-19 16:34, Jonathan Cameron wrote:
> On 17/11/16 21:48, Peter Rosin wrote:
>> When both the iio subsystem and the i2c subsystem wants to update
>> the same mux, there needs to be some coordination. Invent a new
>> minimal "mux" subsystem that handles this.
> I'd probably put something more general in the description. Lots of things
> may need the same infrastructure. This is just an example.
I'll make it more general for the next round.
> Few bits inline.
>
> Also, I suspect you will fairly rapidly have a need for a strobe signal
> as well. A lot of mux chips that are more than 2 way seem to have them to
> allow multiple chips to be synchronized.
I think that can be easily added later, when/if it's needed.
>>
>> Add a single backend driver for this new subsystem that can
>> control gpio based multiplexers.
>> ---
>> drivers/misc/Kconfig | 6 +
>> drivers/misc/Makefile | 2 +
>> drivers/misc/mux-core.c | 299 ++++++++++++++++++++++++++++++++++++++++++++++++
>> drivers/misc/mux-gpio.c | 115 +++++++++++++++++++
>> include/linux/mux.h | 53 +++++++++
>> 5 files changed, 475 insertions(+)
>> create mode 100644 drivers/misc/mux-core.c
>> create mode 100644 drivers/misc/mux-gpio.c
>> create mode 100644 include/linux/mux.h
>>
>> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
>> index 64971baf11fa..9e119bb78d82 100644
>> --- a/drivers/misc/Kconfig
>> +++ b/drivers/misc/Kconfig
>> @@ -766,6 +766,12 @@ config PANEL_BOOT_MESSAGE
>> An empty message will only clear the display at driver init time. Any other
>> printf()-formatted message is valid with newline and escape codes.
>>
>> +config MUX_GPIO
>> + tristate "GPIO-controlled MUX controller"
>> + depends on OF
>> + help
>> + GPIO-controlled MUX controller
>> +
>> source "drivers/misc/c2port/Kconfig"
>> source "drivers/misc/eeprom/Kconfig"
>> source "drivers/misc/cb710/Kconfig"
>> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
>> index 31983366090a..92b547bcbac1 100644
>> --- a/drivers/misc/Makefile
>> +++ b/drivers/misc/Makefile
>> @@ -53,6 +53,8 @@ obj-$(CONFIG_ECHO) += echo/
>> obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
>> obj-$(CONFIG_CXL_BASE) += cxl/
>> obj-$(CONFIG_PANEL) += panel.o
>> +obj-$(CONFIG_MUX_GPIO) += mux-core.o
>> +obj-$(CONFIG_MUX_GPIO) += mux-gpio.o
>>
>> lkdtm-$(CONFIG_LKDTM) += lkdtm_core.o
>> lkdtm-$(CONFIG_LKDTM) += lkdtm_bugs.o
>> diff --git a/drivers/misc/mux-core.c b/drivers/misc/mux-core.c
>> new file mode 100644
>> index 000000000000..7a8bf003a92c
>> --- /dev/null
>> +++ b/drivers/misc/mux-core.c
>> @@ -0,0 +1,299 @@
>> +/*
>> + * Multiplexer subsystem
>> + *
>> + * Copyright (C) 2016 Axentia Technologies AB
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#define pr_fmt(fmt) "mux-core: " fmt
>> +
>> +#include <linux/device.h>
>> +#include <linux/err.h>
>> +#include <linux/idr.h>
>> +#include <linux/module.h>
>> +#include <linux/mux.h>
>> +#include <linux/of.h>
>> +#include <linux/slab.h>
>> +
>> +static struct bus_type mux_bus_type = {
>> + .name = "mux",
>> +};
>> +
>> +static int __init mux_init(void)
>> +{
>> + return bus_register(&mux_bus_type);
>> +}
>> +
>> +static void __exit mux_exit(void)
>> +{
>> + bus_unregister(&mux_bus_type);
>> +}
>> +
>> +static DEFINE_IDA(mux_ida);
>> +
>> +static void mux_control_release(struct device *dev)
>> +{
>> + struct mux_control *mux = to_mux_control(dev);
>> +
>> + ida_simple_remove(&mux_ida, mux->id);
>> + kfree(mux);
>> +}
>> +
>> +static struct device_type mux_control_type = {
>> + .name = "mux-control",
>> + .release = mux_control_release,
>> +};
>> +
>> +/*
>> + * Allocate a mux-control, plus an extra memory area for private use
>> + * by the caller.
>> + */
>> +struct mux_control *mux_control_alloc(size_t sizeof_priv)
>> +{
>> + struct mux_control *mux;
>> +
> Worth planning ahead for spi controlled muxes and others that need their
> structures to be carefully aligned to avoid dma cacheline fun?
> Easy enough to add later I guess.
Right, I'll leave it for later when/if it's needed.
>> + mux = kzalloc(sizeof(*mux) + sizeof_priv, GFP_KERNEL);
>> + if (!mux)
>> + return NULL;
>> +
>> + mux->dev.bus = &mux_bus_type;
>> + mux->dev.type = &mux_control_type;
>> + device_initialize(&mux->dev);
>> + dev_set_drvdata(&mux->dev, mux);
>> +
>> + init_rwsem(&mux->lock);
>> + mux->priv = mux + 1;
> Needed? Or just do it with a bit of pointer math where the access is needed?
Good suggestion, I'll add an inline function and drop the priv member.
>> +
>> + mux->id = ida_simple_get(&mux_ida, 0, 0, GFP_KERNEL);
>> + if (mux->id < 0) {
>> + pr_err("mux-controlX failed to get device id\n");
>> + kfree(mux);
>> + return NULL;
>> + }
>> + dev_set_name(&mux->dev, "mux:control%d", mux->id);
>> +
>> + mux->cached_state = -1;
>> + mux->idle_state = -1;
>> +
>> + return mux;
>> +}
>> +EXPORT_SYMBOL_GPL(mux_control_alloc);
>> +
>> +/*
>> + * Register the mux-control, thus readying it for use.
> Either single line comment style - or perhaps kernel doc the lot...
Kernel doc was the plan from the start, coming up...
>> + */
>> +int mux_control_register(struct mux_control *mux)
>> +{
>> + /* If the calling driver did not initialize of_node, do it here */
>> + if (!mux->dev.of_node && mux->dev.parent)
>> + mux->dev.of_node = mux->dev.parent->of_node;
>> +
>> + return device_add(&mux->dev);
>> +}
>> +EXPORT_SYMBOL_GPL(mux_control_register);
>> +
>> +/*
>> + * Take the mux-control off-line.
>> + */
>> +void mux_control_unregister(struct mux_control *mux)
>> +{
>> + device_del(&mux->dev);
>> +}
>> +EXPORT_SYMBOL_GPL(mux_control_unregister);
>> +
>> +/*
>> + * Put away the mux-control for good.
>> + */
>> +void mux_control_put(struct mux_control *mux)
>> +{
>> + if (!mux)
>> + return;
>> + put_device(&mux->dev);
>> +}
>> +EXPORT_SYMBOL_GPL(mux_control_put);
>> +
>> +static int mux_control_set(struct mux_control *mux, int state)
>> +{
>> + int ret = mux->ops->set(mux, state);
>> +
>> + mux->cached_state = ret < 0 ? -1 : state;
>> +
>> + return ret;
>> +}
>> +
>> +/*
>> + * Select the given multiplexer channel. Call mux_control_deselect()
>> + * when the operation is complete on the multiplexer channel, and the
>> + * multiplexer is free for others to use.
>> + */
>> +int mux_control_select(struct mux_control *mux, int state)
>> +{
>> + int ret;
>> +
>> + if (down_read_trylock(&mux->lock)) {
>> + if (mux->cached_state == state)
>> + return 0;
>> +
>> + /* Sigh, the mux needs updating... */
>> + up_read(&mux->lock);
>> + }
>> +
>> + /* ...or it's just contended. */
>> + down_write(&mux->lock);
>> +
>> + if (mux->cached_state == state) {
>> + /*
>> + * Hmmm, someone else changed the mux to my liking.
>> + * That makes me wonder how long I waited for nothing...
>> + */
>> + downgrade_write(&mux->lock);
>> + return 0;
>> + }
>> +
>> + ret = mux_control_set(mux, state);
>> + if (ret < 0) {
>> + if (mux->idle_state != -1)
>> + mux_control_set(mux, mux->idle_state);
>> +
>> + up_write(&mux->lock);
>> + return ret;
>> + }
>> +
>> + downgrade_write(&mux->lock);
>> +
>> + return 1;
>> +}
>> +EXPORT_SYMBOL_GPL(mux_control_select);
>> +
>> +/*
>> + * Deselect the previously selected multiplexer channel.
>> + */
>> +int mux_control_deselect(struct mux_control *mux)
>> +{
>> + int ret = 0;
>> +
>> + if (mux->idle_state != -1 && mux->cached_state != mux->idle_state)
>> + ret = mux_control_set(mux, mux->idle_state);
>> +
>> + up_read(&mux->lock);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(mux_control_deselect);
>> +
>> +static int of_dev_node_match(struct device *dev, void *data)
>> +{
>> + return dev->of_node == data;
>> +}
>> +
>> +static struct mux_control *of_find_mux_by_node(struct device_node *np)
>> +{
>> + struct device *dev;
>> +
>> + dev = bus_find_device(&mux_bus_type, NULL, np, of_dev_node_match);
>> +
>> + return dev ? to_mux_control(dev) : NULL;
>> +}
>> +
>> +static struct mux_control *of_mux_control_get(struct device_node *np, int index)
>> +{
>> + struct device_node *mux_np;
>> + struct mux_control *mux;
>> +
>> + mux_np = of_parse_phandle(np, "control-muxes", index);
>> + if (!mux_np)
>> + return NULL;
>> +
>> + mux = of_find_mux_by_node(mux_np);
>> + of_node_put(mux_np);
>> +
>> + return mux;
>> +}
>> +
>> +/*
>> + * Get a named mux.
>> + */
>> +struct mux_control *mux_control_get(struct device *dev, const char *mux_name)
>> +{
>> + struct device_node *np = dev->of_node;
>> + struct mux_control *mux;
>> + int index;
>> +
>> + index = of_property_match_string(np, "control-mux-names", mux_name);
>> + if (index < 0) {
>> + dev_err(dev, "failed to get control-mux %s:%s(%i)\n",
>> + np->full_name, mux_name ?: "", index);
>> + return ERR_PTR(index);
>> + }
>> +
>> + mux = of_mux_control_get(np, index);
>> + if (!mux)
>> + return ERR_PTR(-EPROBE_DEFER);
>> +
>> + return mux;
>> +}
>> +EXPORT_SYMBOL_GPL(mux_control_get);
>> +
>> +static void devm_mux_control_free(struct device *dev, void *res)
>> +{
>> + struct mux_control *mux = *(struct mux_control **)res;
>> +
>> + mux_control_put(mux);
>> +}
>> +
>> +/*
>> + * Get a named mux, with resource management.
>> + */
> Guess it might be elsewhere in patch set but remember to add this to
> the global list of devm interfaces (in Documentation somewhere.. IIRC)
Right, now that you mention it, I remember having seen that document
at some point. I'll look it up.
Thanks for all comments!
Cheers,
Peter
>> +struct mux_control *devm_mux_control_get(struct device *dev,
>> + const char *mux_name)
>> +{
>> + struct mux_control **ptr, *mux;
>> +
>> + ptr = devres_alloc(devm_mux_control_free, sizeof(*ptr), GFP_KERNEL);
>> + if (!ptr)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + mux = mux_control_get(dev, mux_name);
>> + if (IS_ERR(mux)) {
>> + devres_free(ptr);
>> + return mux;
>> + }
>> +
>> + *ptr = mux;
>> + devres_add(dev, ptr);
>> +
>> + return mux;
>> +}
>> +EXPORT_SYMBOL_GPL(devm_mux_control_get);
>> +
>> +static int devm_mux_control_match(struct device *dev, void *res, void *data)
>> +{
>> + struct mux_control **r = res;
>> +
>> + if (!r || !*r) {
>> + WARN_ON(!r || !*r);
>> + return 0;
>> + }
>> +
>> + return *r == data;
>> +}
>> +
>> +/*
>> + * Resource-managed version mux_control_put.
>> + */
>> +void devm_mux_control_put(struct device *dev, struct mux_control *mux)
>> +{
>> + WARN_ON(devres_release(dev, devm_mux_control_free,
>> + devm_mux_control_match, mux));
>> +}
>> +EXPORT_SYMBOL_GPL(devm_mux_control_put);
>> +
>> +subsys_initcall(mux_init);
>> +module_exit(mux_exit);
>> +
>> +MODULE_AUTHOR("Peter Rosin <peda@xxxxxxxxxx");
>> +MODULE_DESCRIPTION("MUX subsystem");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/misc/mux-gpio.c b/drivers/misc/mux-gpio.c
>> new file mode 100644
>> index 000000000000..2ddd7fb24078
>> --- /dev/null
>> +++ b/drivers/misc/mux-gpio.c
>> @@ -0,0 +1,115 @@
>> +/*
>> + * GPIO-controlled multiplexer driver
>> + *
>> + * Copyright (C) 2016 Axentia Technologies AB
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/module.h>
>> +#include <linux/mux.h>
>> +#include <linux/of.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/platform_device.h>
>> +
>> +struct mux_gpio {
>> + struct gpio_descs *gpios;
>> +};
>> +
>> +static int mux_gpio_set(struct mux_control *mux, int val)
>> +{
>> + struct mux_gpio *mux_gpio = mux->priv;
>> + int i;
>> +
>> + for (i = 0; i < mux_gpio->gpios->ndescs; i++)
>> + gpiod_set_value_cansleep(mux_gpio->gpios->desc[i],
>> + val & (1 << i));
>> +
>> + return 0;
>> +}
>> +
>> +static const struct mux_control_ops mux_gpio_ops = {
>> + .set = mux_gpio_set,
>> +};
>> +
>> +static const struct of_device_id mux_gpio_dt_ids[] = {
>> + { .compatible = "mux-gpio", },
>> + { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, mux_gpio_dt_ids);
>> +
>> +static int mux_gpio_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct device_node *np = pdev->dev.of_node;
>> + struct mux_control *mux;
>> + struct mux_gpio *mux_gpio;
>> + u32 idle_state;
>> + int ret;
>> +
>> + if (!np)
>> + return -ENODEV;
>> +
>> + mux = mux_control_alloc(sizeof(*mux_gpio));
>> + if (!mux)
>> + return -ENOMEM;
>> + mux_gpio = mux->priv;
>> + mux->dev.parent = dev;
>> + mux->ops = &mux_gpio_ops;
>> +
>> + platform_set_drvdata(pdev, mux);
>> +
>> + mux_gpio->gpios = devm_gpiod_get_array(dev, "mux", GPIOD_OUT_LOW);
>> + if (IS_ERR(mux_gpio->gpios)) {
>> + if (PTR_ERR(mux_gpio->gpios) != -EPROBE_DEFER)
>> + dev_err(dev, "failed to get gpios\n");
>> + mux_control_put(mux);
>> + return PTR_ERR(mux_gpio->gpios);
>> + }
>> +
>> + ret = of_property_read_u32(np, "idle-state", &idle_state);
>> + if (ret >= 0) {
>> + if (idle_state >= (1 << mux_gpio->gpios->ndescs)) {
>> + dev_err(dev, "invalid idle-state %u\n", idle_state);
>> + return -EINVAL;
>> + }
>> + mux->idle_state = idle_state;
>> + }
>> +
>> + ret = mux_control_register(mux);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to register mux_control\n");
>> + mux_control_put(mux);
>> + return ret;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int mux_gpio_remove(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct mux_control *mux = to_mux_control(dev);
>> +
>> + mux_control_unregister(mux);
>> + mux_control_put(mux);
>> + return 0;
>> +}
>> +
>> +static struct platform_driver mux_gpio_driver = {
>> + .driver = {
>> + .name = "mux-gpio",
>> + .of_match_table = of_match_ptr(mux_gpio_dt_ids),
>> + },
>> + .probe = mux_gpio_probe,
>> + .remove = mux_gpio_remove,
>> +};
>> +module_platform_driver(mux_gpio_driver);
>> +
>> +MODULE_AUTHOR("Peter Rosin <peda@xxxxxxxxxx");
>> +MODULE_DESCRIPTION("GPIO-controlled multiplexer driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/include/linux/mux.h b/include/linux/mux.h
>> new file mode 100644
>> index 000000000000..5b21b8184056
>> --- /dev/null
>> +++ b/include/linux/mux.h
>> @@ -0,0 +1,53 @@
>> +/*
>> + * mux.h - definitions for the multiplexer interface
>> + *
>> + * Copyright (C) 2016 Axentia Technologies AB
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#ifndef _LINUX_MUX_H
>> +#define _LINUX_MUX_H
>> +
>> +#include <linux/device.h>
>> +#include <linux/rwsem.h>
>> +
>> +struct mux_control;
>> +
>> +struct mux_control_ops {
>> + int (*set)(struct mux_control *mux, int reg);
>> +};
>> +
>> +struct mux_control {
>> + struct rw_semaphore lock; /* protects the state of the mux */
>> +
>> + struct device dev;
>> + int id;
>> +
>> + int cached_state;
>> + int idle_state;
>> +
>> + const struct mux_control_ops *ops;
>> +
>> + void *priv;
>> +};
>> +
>> +#define to_mux_control(x) container_of((x), struct mux_control, dev)
>> +
>> +struct mux_control *mux_control_alloc(size_t sizeof_priv);
>> +int mux_control_register(struct mux_control *mux);
>> +void mux_control_unregister(struct mux_control *mux);
>> +void mux_control_put(struct mux_control *mux);
>> +
>> +int mux_control_select(struct mux_control *mux, int state);
>> +int mux_control_deselect(struct mux_control *mux);
>> +
>> +struct mux_control *mux_control_get(struct device *dev,
>> + const char *mux_name);
>> +struct mux_control *devm_mux_control_get(struct device *dev,
>> + const char *mux_name);
>> +void devm_mux_control_put(struct device *dev, struct mux_control *mux);
>> +
>> +#endif /* _LINUX_MUX_H */
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
