Re: [PATCH v7 05/15] i2c: octeon: Enable High-Level Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 25, 2016 at 11:44:29PM +0200, Wolfram Sang wrote:
> On Mon, Apr 25, 2016 at 04:33:34PM +0200, Jan Glauber wrote:
> > From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
> > 
> > Use High-Level Controller (HLC) when possible. The HLC can read/write
> > up to 8 bytes and is completely optional. The most important difference
> > of the HLC is that it only requires one interrupt for a transfer
> > (up to 8 bytes) where the low-level read/write requires 2 interrupts
> > plus one interrupt per transferred byte. Since the interrupts are costly
> > using the HLC improves the performance. Also, the HLC provides improved
> > error handling.
> > 
> > Signed-off-by: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
> > Signed-off-by: Jan Glauber <jglauber@xxxxxxxxxx>
> 
> Applied to for-next, thanks!
> 
> I can recommend using --strict with checkpatch. It found some issues:

I thought checkpatch is always strict, but seriously, I didn't know that
option. Thanks for fixing that!

Jan

> total: 0 errors, 0 warnings, 18 checks, 427 lines checked
> 
> CHECK: No space is necessary after a cast
> #327: FILE: drivers/i2c/busses/i2c-octeon.c:563:
> +		ext |= (u64) msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
> 
> I fixed all 14 of those.
> 
> CHECK: braces {} should be used on all arms of this statement
> #325: FILE: drivers/i2c/busses/i2c-octeon.c:561:
> +	if (msgs[0].len == 2) {
> [...]
> +	} else
> [...]
> 
> and 2 of those.
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux