Re: [PATCH 2/2] i2c: cadence: Implement save restore

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1.3.2016 07:32, Shubhrajyoti Datta wrote:
> Implement save restore for i2c module.
> Since we have only a couple of registers
> an unconditional restore is done.
> 
> Signed-off-by: Shubhrajyoti Datta <shubhraj@xxxxxxxxxx>
> ---
> zynq-mp has the capability of going off.
> the current kernel does not hit off however some day it will.
> since the overhead of having the support is not much may be it is better
> to have it in the kernel.
> 
>  drivers/i2c/busses/i2c-cadence.c |   32 ++++++++++++++++++--------------
>  1 files changed, 18 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
> index a761520..3d50914 100644
> --- a/drivers/i2c/busses/i2c-cadence.c
> +++ b/drivers/i2c/busses/i2c-cadence.c
> @@ -161,6 +161,7 @@ struct cdns_i2c {
>  	struct clk *clk;
>  	struct notifier_block clk_rate_change_nb;
>  	u32 quirks;
> +	u32 ctrl_reg;

kernel-doc update too.

>  };
>  
>  struct cdns_platform_data {
> @@ -743,12 +744,11 @@ static int cdns_i2c_setclk(unsigned long clk_in, struct cdns_i2c *id)
>  	if (ret)
>  		return ret;
>  
> -	ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
> +	ctrl_reg = id->ctrl_reg;
>  	ctrl_reg &= ~(CDNS_I2C_CR_DIVA_MASK | CDNS_I2C_CR_DIVB_MASK);
>  	ctrl_reg |= ((div_a << CDNS_I2C_CR_DIVA_SHIFT) |
>  			(div_b << CDNS_I2C_CR_DIVB_SHIFT));
> -	cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
> -
> +	id->ctrl_reg = ctrl_reg;
>  	return 0;
>  }
>  
> @@ -831,6 +831,18 @@ static int __maybe_unused cdns_i2c_runtime_suspend(struct device *dev)
>  
>  	return 0;
>  }

You probably want to put empty line here. And most of functions have
kernel-doc and will be good to follow this up.

> +static void cdns_i2c_init(struct cdns_i2c *id)
> +{
> +	cdns_i2c_writereg(id->ctrl_reg, CDNS_I2C_CR_OFFSET);
> +	/*
> +	 * Cadence I2C controller has a bug wherein it generates
> +	 * invalid read transaction after HW timeout in master receiver mode.
> +	 * HW timeout is not used by this driver and the interrupt is disabled.
> +	 * But the feature itself cannot be disabled. Hence maximum value
> +	 * is written to this register to reduce the chances of error.
> +	 */
> +	cdns_i2c_writereg(CDNS_I2C_TIMEOUT_MAX, CDNS_I2C_TIME_OUT_OFFSET);
> +}
>  
>  /**
>   * cdns_i2c_runtime_resume - Runtime resume
> @@ -851,6 +863,7 @@ static int __maybe_unused cdns_i2c_runtime_resume(struct device *dev)
>  		dev_err(dev, "Cannot enable clock.\n");
>  		return ret;
>  	}
> +	cdns_i2c_init(xi2c);
>  
>  	return 0;
>  }
> @@ -943,8 +956,7 @@ static int cdns_i2c_probe(struct platform_device *pdev)
>  	if (ret || (id->i2c_clk > CDNS_I2C_SPEED_MAX))
>  		id->i2c_clk = CDNS_I2C_SPEED_DEFAULT;
>  
> -	cdns_i2c_writereg(CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS,
> -			  CDNS_I2C_CR_OFFSET);
> +	id->ctrl_reg = CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS;
>  
>  	ret = cdns_i2c_setclk(id->input_clk, id);
>  	if (ret) {
> @@ -965,15 +977,7 @@ static int cdns_i2c_probe(struct platform_device *pdev)
>  		dev_err(&pdev->dev, "reg adap failed: %d\n", ret);
>  		goto err_clk_dis;
>  	}
> -
> -	/*
> -	 * Cadence I2C controller has a bug wherein it generates
> -	 * invalid read transaction after HW timeout in master receiver mode.
> -	 * HW timeout is not used by this driver and the interrupt is disabled.
> -	 * But the feature itself cannot be disabled. Hence maximum value
> -	 * is written to this register to reduce the chances of error.
> -	 */
> -	cdns_i2c_writereg(CDNS_I2C_TIMEOUT_MAX, CDNS_I2C_TIME_OUT_OFFSET);
> +	cdns_i2c_init(id);
>  
>  	dev_info(&pdev->dev, "%u kHz mmio %08lx irq %d\n",
>  		 id->i2c_clk / 1000, (unsigned long)r_mem->start, id->irq);
> 

Thanks,
Michal
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux