[RFC PATCH 2/9] iio: imu: inv_mpu6050: Fix Yoda conditions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This fixes the following checkpatch warning:
	* WARNING: Comparisons should place the constant
	  on the right side of the test

Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxxxx>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 6 +++---
 drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 84e014c..c550ebb 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -84,7 +84,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
 	 * clock source be switched to gyro. Otherwise, it must be set to
 	 * internal clock
 	 */
-	if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
+	if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) {
 		result = regmap_read(st->map, st->reg->pwr_mgmt_1, &mgmt_1);
 		if (result)
 			return result;
@@ -92,7 +92,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
 		mgmt_1 &= ~INV_MPU6050_BIT_CLK_MASK;
 	}
 
-	if ((INV_MPU6050_BIT_PWR_GYRO_STBY == mask) && (!en)) {
+	if ((mask == INV_MPU6050_BIT_PWR_GYRO_STBY) && (!en)) {
 		/*
 		 * turning off gyro requires switch to internal clock first.
 		 * Then turn off gyro engine
@@ -117,7 +117,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
 	if (en) {
 		/* Wait for output stabilize */
 		msleep(INV_MPU6050_TEMP_UP_TIME);
-		if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
+		if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) {
 			/* switch internal clock to PLL */
 			mgmt_1 |= INV_CLK_PLL;
 			result = regmap_write(st->map,
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index 1fc5fd9..441080b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -168,7 +168,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
 
 		result = kfifo_out(&st->timestamps, &timestamp, 1);
 		/* when there is no timestamp, put timestamp as 0 */
-		if (0 == result)
+		if (result == 0)
 			timestamp = 0;
 
 		result = iio_push_to_buffers_with_timestamp(indio_dev, data,
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux