Re: [PATCH] i2c: s3c2410: Don't enable PM runtime on the adapter device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16/04/15 12:10, Charles Keepax wrote:
> Commit 523c5b89640e ("i2c: Remove support for legacy PM") removed the PM
> ops from the bus type, which causes the pm operations on the s3c2410
> adapter device to fail (-ENOSUPP in rpm_callback). The adapter device
> doesn't get bound to a driver and as such can't have its own pm_runtime
> callbacks. Previously this was fine as the bus callbacks would have been
> used, but now this can cause devices which use PM runtime and are
> attached over I2C to fail to resume.
> 
> This commit fixes this issue by just doing the PM operations directly on
> the I2C device, rather than the adapter device in the driver and adding
> some stub callbacks for runtime suspend and resume.
> 
> Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-s3c2410.c |   21 ++++++++++++++++-----
>  1 files changed, 16 insertions(+), 5 deletions(-)

> @@ -1253,7 +1253,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
>  	platform_set_drvdata(pdev, i2c);
>  

Wouldn't adding

	pm_runtime_no_callbacks(&pdev->dev);

here let us avoid the runtime resume/suspend stubs?

>  	pm_runtime_enable(&pdev->dev);
> -	pm_runtime_enable(&i2c->adap.dev);
>  
>  	dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
>  	return 0;
> @@ -1270,7 +1269,6 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
>  
>  	clk_unprepare(i2c->clk);
>  
> -	pm_runtime_disable(&i2c->adap.dev);
>  	pm_runtime_disable(&pdev->dev);
>  
>  	s3c24xx_i2c_deregister_cpufreq(i2c);
> @@ -1318,6 +1316,16 @@ static int s3c24xx_i2c_resume_noirq(struct device *dev)
>  #endif
>  
>  #ifdef CONFIG_PM
> +static int s3c24xx_runtime_resume(struct device *dev)
> +{
> +	return 0;
> +}
> +
> +static int s3c24xx_runtime_suspend(struct device *dev)
> +{
> +	return 0;
> +}

--
Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux