[PATCH v1] HID: bug fixes in hid-cp2112 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



1. cp2112_xfer() byte swaps smbus words incorrectly:

While i2c is by and large big endian, smbus transactions are
little endian.  This only affects word operands.  Essentially,
all occurences of be16 in cp2112_xfer() are now le16.

2. I2C_SMBUS_BYTE write in cp2112_xfer() should pass "command"
as the single data byte, not "data->byte":

When tickled the right way, this actually segfaults the kernel
because "data" is NULL.

3. cp2112_i2c_xfer() only supports a single i2c_msg and only
reads up to 61 bytes:

This is a serious limitation.  For example, the at24 eeprom driver
generates paired write and read messages (for eeprom address and data).
And the reads can be quite large.  The fix consists of a loop
to go through all the messages, and a loop around cp2112_read()
to pick up all the returned data.  For extra credit, it now also
supports write-read pairs and implements them as
CP2112_DATA_WRITE_READ_REQUEST.

Signed-off-by: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
---
This is a funny driver that is a bridge from usb hid to i2c.
So while it officially belongs to hid, most of the functionality
is about i2c.  So I'm sending this patch to both linux-input
and linux-i2c.  David Barksdale <dbarksdale@xxxxxxxxxxx> is
the original author/owner in the .c file.

While this patch contains three bug fixes, the first two are
quite trivial.  I'm hoping it's OK to glom them into one.

The patch was made against master in
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git,
but the only file modified (drivers/hid/hid-cp2112.c) is the same
pretty much everywhere (including mainline and the i2c repository).

Testing was done on the Facebook Wedge switch, documented at
http://files.opencompute.org/oc/public.php?service=files&t=cbc56082857b154a157aa46cdcb4b9b1

Thank you for your time.
---
 drivers/hid/hid-cp2112.c |  147 +++++++++++++++++++++++++++++-----------------
 1 file changed, 92 insertions(+), 55 deletions(-)

diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
index 3318de6..3999af3 100644
--- a/drivers/hid/hid-cp2112.c
+++ b/drivers/hid/hid-cp2112.c
@@ -444,11 +444,30 @@ static int cp2112_i2c_write_req(void *buf, u8 slave_address, u8 *data,
 	return data_length + 3;
 }
 
+static int cp2112_i2c_write_read_req(void *buf, u8 slave_address,
+				     u8 *addr, int addr_length,
+				     int read_length)
+{
+	struct cp2112_write_read_req_report *report = buf;
+
+	if (read_length < 1 || read_length > 512 ||
+	    addr_length > sizeof(report->target_address))
+		return -EINVAL;
+
+	report->report = CP2112_DATA_WRITE_READ_REQUEST;
+	report->slave_address = slave_address << 1;
+	report->length = cpu_to_be16(read_length);
+	report->target_address_length = addr_length;
+	memcpy(report->target_address, addr, addr_length);
+	return addr_length + 5;
+}
+
 static int cp2112_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 			   int num)
 {
 	struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data;
 	struct hid_device *hdev = dev->hdev;
+	struct i2c_msg *m;
 	u8 buf[64];
 	ssize_t count;
 	unsigned int retries;
@@ -456,71 +475,90 @@ static int cp2112_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
 
 	hid_dbg(hdev, "I2C %d messages\n", num);
 
-	if (num != 1) {
-		hid_err(hdev,
-			"Multi-message I2C transactions not supported\n");
-		return -EOPNOTSUPP;
-	}
-
-	if (msgs->flags & I2C_M_RD)
-		count = cp2112_read_req(buf, msgs->addr, msgs->len);
-	else
-		count = cp2112_i2c_write_req(buf, msgs->addr, msgs->buf,
-					     msgs->len);
-
-	if (count < 0)
-		return count;
-
 	ret = hid_hw_power(hdev, PM_HINT_FULLON);
 	if (ret < 0) {
 		hid_err(hdev, "power management error: %d\n", ret);
 		return ret;
 	}
 
-	ret = cp2112_hid_output(hdev, buf, count, HID_OUTPUT_REPORT);
-	if (ret < 0) {
-		hid_warn(hdev, "Error starting transaction: %d\n", ret);
-		goto power_normal;
-	}
+	for (m = msgs; m < msgs + num; m++) {
+		/*
+		 * If the top two messages are a write followed by a read,
+		 * then we do them together as CP2112_DATA_WRITE_READ_REQUEST.
+		 * Otherwise, process one message.
+		 */
+
+		if (m + 1 < msgs + num && m[0].addr == m[1].addr &&
+		    !(m[0].flags & I2C_M_RD) && (m[1].flags & I2C_M_RD)) {
+			hid_dbg(hdev, "I2C msg %zd write-read %#04x wlen %d rlen %d\n",
+				m - msgs, m[0].addr, m[0].len, m[1].len);
+			count = cp2112_i2c_write_read_req(buf, m[0].addr,
+					m[0].buf, m[0].len, m[1].len);
+			m++;
+		} else if (m->flags & I2C_M_RD) {
+			hid_dbg(hdev, "I2C msg %zd read %#04x len %d\n",
+				m - msgs, m->addr, m->len);
+			count = cp2112_read_req(buf, m->addr, m->len);
+		} else {
+			hid_dbg(hdev, "I2C msg %zd write %#04x len %d\n",
+				m - msgs, m->addr, m->len);
+			count = cp2112_i2c_write_req(buf, m->addr, m->buf,
+						     m->len);
+		}
 
-	for (retries = 0; retries < XFER_STATUS_RETRIES; ++retries) {
-		ret = cp2112_xfer_status(dev);
-		if (-EBUSY == ret)
-			continue;
-		if (ret < 0)
+		if (count < 0) {
+			ret = count;
 			goto power_normal;
-		break;
-	}
+		}
 
-	if (XFER_STATUS_RETRIES <= retries) {
-		hid_warn(hdev, "Transfer timed out, cancelling.\n");
-		buf[0] = CP2112_CANCEL_TRANSFER;
-		buf[1] = 0x01;
+		ret = cp2112_hid_output(hdev, buf, count, HID_OUTPUT_REPORT);
+		if (ret < 0) {
+			hid_warn(hdev, "Error starting transaction: %d\n", ret);
+			goto power_normal;
+		}
 
-		ret = cp2112_hid_output(hdev, buf, 2, HID_OUTPUT_REPORT);
-		if (ret < 0)
-			hid_warn(hdev, "Error cancelling transaction: %d\n",
-				 ret);
+		for (retries = 0; retries < XFER_STATUS_RETRIES; ++retries) {
+			ret = cp2112_xfer_status(dev);
+			if (-EBUSY == ret)
+				continue;
+			if (ret < 0)
+				goto power_normal;
+			break;
+		}
 
-		ret = -ETIMEDOUT;
-		goto power_normal;
-	}
+		if (XFER_STATUS_RETRIES <= retries) {
+			hid_warn(hdev, "Transfer timed out, cancelling.\n");
+			buf[0] = CP2112_CANCEL_TRANSFER;
+			buf[1] = 0x01;
 
-	if (!(msgs->flags & I2C_M_RD))
-		goto finish;
+			ret = cp2112_hid_output(hdev, buf, 2,
+						HID_OUTPUT_REPORT);
+			if (ret < 0)
+				hid_warn(hdev,
+					 "Error cancelling transaction: %d\n",
+					 ret);
 
-	ret = cp2112_read(dev, msgs->buf, msgs->len);
-	if (ret < 0)
-		goto power_normal;
-	if (ret != msgs->len) {
-		hid_warn(hdev, "short read: %d < %d\n", ret, msgs->len);
-		ret = -EIO;
-		goto power_normal;
+			ret = -ETIMEDOUT;
+			goto power_normal;
+		}
+
+		if (!(m->flags & I2C_M_RD))
+			continue;
+
+		for (count = 0; count < m->len;) {
+			ret = cp2112_read(dev, m->buf + count, m->len - count);
+			if (ret < 0)
+				goto power_normal;
+			count += ret;
+			if (count > m->len) {
+				hid_warn(hdev, "long read: %d > %zd\n",
+					 ret, m->len - count + ret);
+			}
+		}
 	}
 
-finish:
 	/* return the number of transferred messages */
-	ret = 1;
+	ret = num;
 
 power_normal:
 	hid_hw_power(hdev, PM_HINT_NORMAL);
@@ -535,7 +573,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 	struct cp2112_device *dev = (struct cp2112_device *)adap->algo_data;
 	struct hid_device *hdev = dev->hdev;
 	u8 buf[64];
-	__be16 word;
+	__le16 word;
 	ssize_t count;
 	size_t read_length = 0;
 	unsigned int retries;
@@ -552,8 +590,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 		if (I2C_SMBUS_READ == read_write)
 			count = cp2112_read_req(buf, addr, read_length);
 		else
-			count = cp2112_write_req(buf, addr, data->byte, NULL,
-						 0);
+			count = cp2112_write_req(buf, addr, command, NULL, 0);
 		break;
 	case I2C_SMBUS_BYTE_DATA:
 		read_length = 1;
@@ -567,7 +604,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 		break;
 	case I2C_SMBUS_WORD_DATA:
 		read_length = 2;
-		word = cpu_to_be16(data->word);
+		word = cpu_to_le16(data->word);
 
 		if (I2C_SMBUS_READ == read_write)
 			count = cp2112_write_read_req(buf, addr, read_length,
@@ -580,7 +617,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 		size = I2C_SMBUS_WORD_DATA;
 		read_write = I2C_SMBUS_READ;
 		read_length = 2;
-		word = cpu_to_be16(data->word);
+		word = cpu_to_le16(data->word);
 
 		count = cp2112_write_read_req(buf, addr, read_length, command,
 					      (u8 *)&word, 2);
@@ -673,7 +710,7 @@ static int cp2112_xfer(struct i2c_adapter *adap, u16 addr,
 		data->byte = buf[0];
 		break;
 	case I2C_SMBUS_WORD_DATA:
-		data->word = be16_to_cpup((__be16 *)buf);
+		data->word = le16_to_cpup((__le16 *)buf);
 		break;
 	case I2C_SMBUS_BLOCK_DATA:
 		if (read_length > I2C_SMBUS_BLOCK_MAX) {
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux