Re: [PATCH 2/4] sc16is7xx: don't wipe out port configuration on shutdown

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, 16 Mar 2015, Jakub Kicinski wrote:

> From: Jakub Kicinski <kubakici@xxxxx>
> 
> EFCR register contains RS-485 configuration which should not
> be changed by shutdown.  Instead of doing a write only update
> the appropriate bits.
> 
> Signed-off-by: Jakub Kicinski <kubakici@xxxxx>

Signed-off-by: Jon Ringle <jringle@xxxxxxxxxxxxx>

> ---
>  drivers/tty/serial/sc16is7xx.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
> index 11bb44039a57..e6b396e584f3 100644
> --- a/drivers/tty/serial/sc16is7xx.c
> +++ b/drivers/tty/serial/sc16is7xx.c
> @@ -903,9 +903,11 @@ static void sc16is7xx_shutdown(struct uart_port *port)
>  	/* Disable all interrupts */
>  	sc16is7xx_port_write(port, SC16IS7XX_IER_REG, 0);
>  	/* Disable TX/RX */
> -	sc16is7xx_port_write(port, SC16IS7XX_EFCR_REG,
> -			     SC16IS7XX_EFCR_RXDISABLE_BIT |
> -			     SC16IS7XX_EFCR_TXDISABLE_BIT);
> +	sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
> +			      SC16IS7XX_EFCR_RXDISABLE_BIT |
> +			      SC16IS7XX_EFCR_TXDISABLE_BIT,
> +			      SC16IS7XX_EFCR_RXDISABLE_BIT |
> +			      SC16IS7XX_EFCR_TXDISABLE_BIT);
>  
>  	sc16is7xx_power(port, 0);
>  }
> -- 
> 2.1.0
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux