Hi Uwe, Thank you for the patch. On Tuesday 17 February 2015 10:12:08 Uwe Kleine-König wrote: > Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) > which appeared in v3.17-rc1, the gpiod_get* functions take an additional > parameter that allows to specify direction and initial value for > outputs. > > Also there is an *_optional variant that serves well here. The sematics > is slightly changed here by using it. Now if a reset gpio is specified > and getting hold on it fails, pca954x_probe fails, too. > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > --- > drivers/i2c/muxes/i2c-mux-pca954x.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c > b/drivers/i2c/muxes/i2c-mux-pca954x.c index ec11b404b433..0042cf3d77db > 100644 > --- a/drivers/i2c/muxes/i2c-mux-pca954x.c > +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c > @@ -201,9 +201,9 @@ static int pca954x_probe(struct i2c_client *client, > i2c_set_clientdata(client, data); > > /* Get the mux out of reset if a reset GPIO is specified. */ > - gpio = devm_gpiod_get(&client->dev, "reset"); > - if (!IS_ERR(gpio)) > - gpiod_direction_output(gpio, 0); > + gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(gpio)) > + return PTR_ERR(gpio); > > /* Write the mux register at addr to verify > * that the mux is in fact present. This also -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
