Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for outputs. Also there is an *_optional variant that serves well here. The sematics is slightly changed here by using it. Now if a reset gpio is specified and getting hold on it fails, pca954x_probe fails, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- drivers/i2c/muxes/i2c-mux-pca954x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c index ec11b404b433..0042cf3d77db 100644 --- a/drivers/i2c/muxes/i2c-mux-pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -201,9 +201,9 @@ static int pca954x_probe(struct i2c_client *client, i2c_set_clientdata(client, data); /* Get the mux out of reset if a reset GPIO is specified. */ - gpio = devm_gpiod_get(&client->dev, "reset"); - if (!IS_ERR(gpio)) - gpiod_direction_output(gpio, 0); + gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(gpio)) + return PTR_ERR(gpio); /* Write the mux register at addr to verify * that the mux is in fact present. This also -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
